Xantrex TM500A Digital Meter 12/24V with Shunt
Xantrex TM500A Digital Meter 12/24V with Deltek 50 mV/500 amp Shunt
The TM500A provides easy to understand information such as produced and used DC current. It keeps track of the energy your system has available and energy consumed to ensure adequate reserve power capacity and longevity of your battery bank.
The TM500A is both an energy supply "fuel gauge" and a sophisticated user-option "energy storage computer" that records system characteristics and data. It provides data on all critical system functions, and is capable of monitoring total accumulated charge power from sources such as photovotaic arrays, wind power systems, and generator sets. The TM500A comes with 50' (15 m) of cable, a Deltek 50 mV/500 amp shunt, a prewired cable, and a plug-in adapter board.
Provides and stores information on critical system functions to help keep track of your battery bank reserve, ensuring adequate power capacity to run appliances.
Monitors the total accumulated charge power from sources such as PV arrays, wind power systems, and generator sets.
Easy-to-install: Simply mount your meter, connect the shunt to your battery cables, and plug in the communication cable.
LED Display allowing easy access to all monitored information.
Adjustable flashing LED indicators provide a recharge reminder and warn against low battery voltage.
Backed by a two-year warranty.
The TM500A Monitors
Battery Voltage:8 to 32 VDC or to 70 Volts DC with optional 48 VDC adapter
Net Battery Current:0.1 to 999 Amps DC
Battery Charge Level:5% increments
Cumulative Amp Hours:Monitors battery bank use and provides estimated battery life information
Days since Full:Days since the battery bank was fully charged -- encourages proper battery management by indicating system problems
Battery Highest Voltage:Resetable, monitors charge controllers and battery chargers
Battery Lowest Voltage:Resetable, monitors system to detect malfunction or system failure.
The TM500A can be ordered with (TM500A) or without (TM500A-NS) a shunt.
An optional high voltage shunt board (TM-48) is available for 48 VDC systems. The adapter mounts on the shunt.
|Dimensions (HxWxD)||3 7/8” x 5 3/8” x 1 1/4” (14 cm x 9.5 cm x 3.2 cm)|
|Weight (not including shunt)||3 lb (1.36 kg)|
|Part numbers||TM500A – meter with shunt, 50’ (15 m) communication cable, and low voltage shunt board|
TM500A-NS – meter with 50’ (15 m) communication cable and low voltage shunt board for shunt, shunt not included
TM-48 – high voltage shunt board for 48 VDC systems
Note: Specifications subject to change without notice.
I purchased this unit and it was defective from the start. It wouldn\'t read my battery voltage correctly and couldn\'t ...
Unit failed and when I called the company, I was told that no one was fixing these units any longer??? ...