Truecharge 10 Battery Charger


The Truecharge 10 Battery Charger is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff


Truecharge 10 Battery Charger

Xantrex Truecharge 10 Battery Charger

Xantrex Truecharge 10 Battery Charger

High Performance, Multistage Charging

Truecharge multistage battery chargers are microprocessor controlledfor fast and accurate charging of all deep-cycle 'house' batteries. Awide AC input voltage range enables proper delivery of a fullthree-stage charge, even when charging from less than perfect qualityshorepower or generator power. Smart features, such as adjustabletemperature compensation and independent settings prevent batterydamage due to overcharging and also help extend the life of expensivebatteries. All Truecharge battery chargers come with a one yearwarranty.

Truecharge 10/10TB

  • 10 amp DC output
  • Microprocessor controlled, multistage charging 
  • Charges up to two battery banks simultaneously (Truecharge 10TB)
  • Covered terminal block with screw terminals for safe and easy connection (Truecharge 10TB)
  • Easy battery connection with clip leads (Truecharge 10)
  • Three settings for temperature compensation (Truecharge 10)
  • Settings for flooded or gel lead-acid batteries
  • Wide voltage range operation (90-135 VAC, 50/60 Hz)
  • Automatic 21-day top-up program

Protection Features

  • Over-temperature shutdown and overload protection
  • Ignition protected for installation in gas engine compartments (10TB, 20+ and 40+)
  • Transformer isolated for safety and to protect against electrolysis
  • Reverse polarity protection 
  • Short-circuit and surge protection
Electrical Specifications for the Truecharge 10
Output current 10 A at 14.5 V nominal
Output voltage (nominal)  
Charge 13.8 - 14.8 VDC
Float 13.1 - 14.2 VDC
DC output connections clip leads
Output fuse 15 A 32 V
AC input voltage 90-135 VAC, 50/60 Hz
Temperature compensation 3 settings
Charger efficiency 85% approx.
Recommended battery type gel / flooded
General Specifications for the Truecharge 10
Operating temperature 32° F to 86° F (0° C to 30° C)
Storage temperature -13° F to 158° F (-25° C to 70° C)
Battery connection alligator clip leads
Dimensions (H x W x D) 2.75 x 6.5 x 9.0" (70 x 165 x 230 mm)
Weight 3.0 lb (1.4 kg)
Warranty One year
Part number 804-0100
Regulatory Approvals for the Truecharge 10
  CSA/NRTL approved to CSA 107.2, UL 1236
Note: Specifications and pricing of the Truecharge 10 Battery Charger subject to change without notice. Illustrations and descriptions of the Xantrex T10 do not claim to be complete or exhaustive.
Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Xantrex
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter