Steca SOLSUM 10.10F Charge Controller 10A with Low Voltage Disconnect
SOLSUM 8.8F Charge Controller 8 amp w/LVD
The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W.
The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller.
Product Features
Electronic protectionfunctions
Displays
Options
Certificates
Also Known As:
SOLSUM.10.10F
SOLSUM-10.10F
SOLSUM_10.10F
SOLSUM10.10F
6.6F | 8.8F | 10.10F | |
Characterisation of the operating performance | |||
System voltage | 12 V (24 V) | ||
Own consumption | < 4 mA | ||
DC input side | |||
Open circuit voltage solar module | < 47 V | ||
Module current | 6 A | 8 A | 10 A |
DC output side | |||
Load current | 6 A | 8 A | 10 A |
End of charge voltage | 13.9 V (27.8 V) | ||
Boost charge voltage | 14.4 V (28.8 V) | ||
Reconnection voltage (LVR) | 12.4 V … 12.7 V (24.8 V … 25.4 V) | ||
Deep discharge protection (LVD) | 11.2 V … 11.6 V (22.4 V … 23.2 V) | ||
Operating conditions | |||
Ambient temperature | -25 °C … +50 °C | ||
Fitting and construction | |||
Terminal (fine / single wire) | 4 mm2 / 6 mm2 - AWG 12 / 9 | ||
Degree of protection | IP 32 | ||
Dimensions (X x Y x Z) | 145 x 100 x 30 mm | ||
Weight approx. | 5.3 lbs (150 g) |