Steca PR2020 20A 12/24V Solar Charge Controller with LCD
PR2020 20A 12/24V Solar Charge Controller with LCD
The latest charging technologies, combined with a Steca-AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.
Features of the Steca PR2020 20A 12/24V Solar Charge Controller with LCD
Electronic Protection Functions
Displays
Operation
Options
Certificates
Also Known As:
PR.2020
PR-2020
PR_2020
PR2020
With LCD | Steca PR1010 | Steca PR1515 | Steca PR2020 | Steca PR3030 |
Max. Charge Current at 50 ° C | 10 A | 15 A | 20 A | 30 A |
Max. Load Current at 50 ° C | 10 A | 15 A | 20 A | 30 A |
Max. Admissable Current | 110 % | 110 % | 110 % | 110 % |
Load Overcurrent | 125 % | 125 % | 125 % | 125 % |
Max. Self Consumption | 12 mA | 12 mA | 12 mA | 12 mA |
Admissable Abient Temperature | - 10 ° + 50 ° C | |||
Connection Terminal (fine/single wire) | 16/25 mm² | |||
Weight | 350 g | 350 g | 350 g | 350 g |
Dimension | 187 x 96 x 44 mm | |||
Protection | IP 22 | |||
System Voltage | 12/24 V | 12/24 V | 12/24 V | 12/24 V |