SolarEdge SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included


The SolarEdge SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. However, SolarEdge has replaced the SE5000US with the following item:

.SolarEdge SE5000A-US 5.0 KW Single Phase Grid Tied Inverter

Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff


SolarEdge SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included

SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included

The SolarEdge combines a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. Our fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.

A proprietary data monitoring receiver is integrated in the inverter and aggregates SolarEdge PowerBox performance data from each PV module. Multiple inverters can be connected in an RS485 bus or using a wireless Zigbee MESH network (optional). The data from the inverters is transmitted to the web using an Ethernet connection or a wireless link and can be accessed via the SolarEdge Monitoring Portal for performance analysis, fault detection and troubleshooting.

The US single phase inverter comes with a built in AC/DC switch while the European single phase inverter can be fitted with a seamlessly attachable cabling duct for managing the installation wirings. Both are light enough for a single person to install on a supplied bracket.

Features of the SolarEdge SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included:

  • Superior efficiency (97.5%)
  • Excellent reliability with standard 12 year warranty (extendable to 20 years)
  • Small, lightweight and easy to install
  • Built in module-level monitoring
  • Communication to internet via Ethernet or wireless
  • Outdoor and indoor installation
Specification SolarEdge Single Phase Inverter SE3300US SE3800US SE5000US SE6000US SE7000US
Output
Rated AC Power Output 3300 W 3800 W 5000W@208V
5000W@240V
5000W@277V*
5200W@208V
6000W@240V
6000W@277V*
5200W@208V*
6000W@240V*
7000W@277V*
Maximum AC Power Output 3300 W 3800 W 5000W@208V
5000W@240V
5000W@277V*
5200W@208V
6000W@240V
6000W@277V*
5200W@208V*
6000W@240V*
7000W@277V*
AC Output Voltage Minimum-Nominal-Maximum 183 - 208 - 229 / 211 - 240 - 264 / 244 - 277 - 294Vac
AC Frequency (Nominal) 59.3 - 60 - 60.5 Hz
Maximum Continuous Output Current 208V Grid 16 A 18.5 A 24 A 25 A 25 A
Maximum Continuous Output Current 240V Grid 14 A 16 A 21 A 25 A 25 A
Maximum Continuous Output Current 277V Grid - - 18 A 21.5 A 25 A
GFDI 1 A
Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes

Input
Recommended Maximum DC Power* (Module STC) 4100 W 4750 W 6250 W 7500 W 8750 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage 500 Vdc
Nominal DC Input Voltage 325 @ 208V/350 @ 240V / 400 @ 277V
Maximum Input Current 10.5 Adc 12 Adc 16 Adc 17.5 Adc 18 Adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 600 k Sensitivity
Maximum Inverter Efficiency 97.60%
European Weighted Efficiency 97.20% 97.30% 97.20% 97% 97%
CEC Weighted Efficiency 97% @ 208V / 97.5% @ 240V / 97.5% @ 277V
Nighttime Power Consumption < 2.5 W

Additional Features
Supported Communication Interfaces RS485, Ethernet, Zigbee (optional)

Standard Compliance
Safety UL1741, IEC-62103 (EN50178), Draft IEC-62109
Grid Connection Standards NEC, VDE 0126-1-1, AS-4777, RD-1663 , DK 5940, IEEE1547
Emissions FCC part15 class B, IEC61000-6-2, IEC61000-6-3,
IEC61000-3-11, IEC61000-3-12
RoHS Yes

Installation Specifications
AC Output 3/4" Conduit
DC Input 3/4" Conduit
Dimensions (HxWxD) 27.5 x 12.5 x 7.5 in / 540 x 315 x 191 mm
Weight 52 lbs / 23 kg
Weight with AC/DC Safety Switch 58 lbs / 26 kg
Cooling Natural Convection
Operating Temperature Range -4 to +120 ?F / -20 to +50 ?C
Protection Rating NEMA 3R
Bracket Mounted (Bracket Provided), Integral AC/DC Safety Switch

* Certification pending
** Higher input DC power may be installed; analyze yearly AC performance.

Note: Specifications and pricing of the SolarEdge SE5000US 5.0 KW Single Phase Grid Tied Inverter with Ethernet, RS485 Included subject to change without notice. Illustrations and descriptions of the SolarEdge SE5000US do not claim to be complete or exhaustive.
Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
SolarEdge
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter