Schneider Electric 865-1030 XW-MPPT60-150 Solar Charge Controller
List Price: $685.00
Price:Minimum Advertised Price

** Minimum Advertised Pricing: Manufacturer’s policy prohibits us from displaying our final sale price here. In order to see our price, please contact us or proceed to check out.
Schneider Electric XW-MPPT60-150 Summary
Product Type
Charge Controller
Battery Voltage
24 Volts
Battery Voltage
48 Volts
Battery Voltage
12 Volts
Battery Voltage
36 Volts
Battery Voltage
60 Volts
Charging Type
Output Current
60 Amps
PV Open Circuit Voltage
150 Voc
PV Input @ 12V
720 Watts
PV Input @ 24V
1440 Watts
PV Input @ 48V
2880 Watts
PV Input @ 60V
4320 Watts
Display Included

Schneider Electric 865-1030 XW-MPPT60-150 Solar Charge Controller

865-1030 XW-MPPT60-150 Solar Charge Controller

The XW Solar Charge Controller (XW SCC) is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the XW SCC regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, the XW SCC can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Xantrex XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.

The XW SCC incorporates a dynamic Maximum Power Point Tracking (MPPT) algorithm designed to maximize energy harvest from the PV array. The MPPT constantly adjusts the operating points of the array to ensure it stays on the maximum power point. It does not stop energy harvest to sweep the array like some other competing products. This feature is beneficial all sunlight conditions, especially in areas with fast moving cloud cover and quickly changing solar conditions.

Standard features of the Solar Charge Controller include:

  • Maximum Power Point Tracking (MPPT) delivers maximum available power from PV array to battery bank
  • Integrated PV ground-fault protection
  • Ultra-reliable, convection-cooled design does not require a cooling fan − large, aluminum, die-cast heat-sink allows full output current up to 45°C without thermal derating
  • Selectable two or three-stage charging algorithms with manual equalization to maximize system performance and improve battery life
  • Configurable auxiliary output
  • Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration and system monitoring
  • Input over-voltage and under-voltage protection, output over-current protection, and backfeed (reverse current) protection (warning and fault messages appear on LCD when unit shuts down as a protective measure)
  • Over-temperature protection and power derating when output power and ambient temperature are high
  • Battery Temperature Sensor (BTS) included − automatically provides temperaturecompensated battery charging
  • Xanbus™-enabled network communications protocol
  • Communicates settings and activity to other Xanbus™-enabled devices, such as the XW Hybrid Inverter/Charger, the XW System Control Panel (XW SCP), XW Automatic Generator Start (XW AGS), and other XW Solar Charge Controllers.
  • Five-year warranty

Also Known As:
XW MPPT60 150

Device short nameXW-MPPT60-150
Product Type ComponentSolar Charger Controller
Battery Voltage

12 V DC, 24 V DC, 36 V DC,
48 V DC, 60 V DC
Input voltage140 V DC <= 150 V DC - opencircuit
Short-circuitcurrent60 A DC
Powerconsumption in W2.5 W while operating
Enclosure typeVentilated
Enclosure materialSheet metal chassis
Device mountingWall mounted vertical
Cable  entry7/8" and 1" knock-outs
Height368 mm
Width146 mm
Depth138 mm
Product weight4.8 kg
AWG gaugeAWG 10
Ambient air temperature for operation -20...45  °C 
Ambient air temp  for storagealtitude-40...85°C
Operating4572 m
StandardsCSA 107.1 UL 1741
Product certificationsFCC Class B
Note: Specifications and pricing of the Schneider Electric 865-1030 XW-MPPT60-150 Solar Charge Controller subject to change without notice. Illustrations and descriptions of the Schneider Electric XW-MPPT60-150 do not claim to be complete or exhaustive.

Customers Who Bought the Schneider Electric 865-1030 XW-MPPT60-150 Solar Charge Controller Also Purchased:

PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Schneider Electric
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter