Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount - 12


The Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount - 12 is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. However, Quick Mount PV has replaced the QMSC-C with the following item:

.Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount

Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff


Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount - 12

QMSC C Clear Anodized Composition Roof Mount - 12

Quick Mount PV roof mounts use patented technology to form the easiest, fastest, most universally code-compliant watertight mount available for composition roofs. The Composition Roof Mount is backed by solid engineering and certified by the ICC (International Code Council).

There's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the felt in the course above, drive the bolt home, and it's done.

The 12 x 12-inch Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!

PV, Solar Hot Water, and More

The Quick Mount PV Composition Roof Mount is the logical choice not only for solar PV installation, but also for rooftop solar hot water systems. In fact, whatever you need to fasten to a composition roof — HVAC equipment, antennas, satellite dishes — use Quick Mount PV to secure and protect every roof installation you put your name on.

Features of the Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount - 12

  • ICC certified
  • One bolt installation
  • No shingle cutting
  • 100% IBC, UBC compliant
  • Meets or exceeds all NRCA standards and practices
  • All aluminum flashing and mount
  • Stainless steel hardware
  • 50 year life
  • Works with all leading racks

Available Finishes

  • Aluminum mill
  • Clear anodized
  • Bronze anodized

Parts and Materials

Each mount kit (12 per box) includes:

  • Cast aluminum mounting block (2-1/4" L x 1-1/4" W x 1-1/4" H) bonded with .05" thick, 12" x 12" aluminum flashing
  • Hanger bolt, 5/16" x 6" (1-1/4" machine, 1-3/4" shank, 3" lag)
  • Stainless steel and EPDM rubber sealing washer, 3/4" x 5/16"
  • Two 5/16" hex nuts
  • EPDM sealing washer with 60 Durometer hardness
  • Stainless steel flat washer, 1" x 5/16"

 

Also Known As:
QMSC.C
QMSC C
QMSC_C
QMSCC

Flashing size 12" x 12"
Pullout/shear 3934 lbs. average pullout (Douglas fir); 4365 lbs. average shear
Tools needed for installation
  • Tape measure
  • Roofers bar/shingle ripper
  • Chalk line
  • Stud finder
  • Caulking gun
  • Appropriate sealant
  • Drill with 1/4" bit
  • Drill or impact gun with deep 1/2" socket
Applicable roof types Standard and high-definition composition and wood shingle roofs with 5" to 5/12" courses
Available finishes
  • Aluminum mill
  • Clear anodized
  • Bronze anodized
Note: Specifications and pricing of the Quick Mount PV QMSC_C Clear Anodized Composition Roof Mount - 12 subject to change without notice. Illustrations and descriptions of the Quick Mount PV QMSC-C do not claim to be complete or exhaustive.
Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Quick Mount PV
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter