Quick Mount PV QMFTM B Specialty Flat Tile Mount with Flashings - Bronze Anodized
[QMFTM B, QMFTM.B, QMFTM-B, QMFTM_B, QMFTMB]
Quick Mount PV QMFTM B Specialty Flat Tile Mount with Flashings - Bronze Anodized
QMF™ B Specialty Flat Tile Mount with Flashings - Bronze Anodized
The aluminum sub-flashing is sized for easy code compliance, and molded to fit snugly over the mounting plate and removable standoff. Use standard roofing methods at the deck – bibbing or 3-coursing, for instance – to seal off rain from the penetrations and fasteners. All exposed components are aluminum, stainless steel or EPDM rubber to help keep penetrations water tight for the life of the PV system and most roofs.
The Quick Mount PV Specialty Flat Tile Roof Mount is the logical choice not only for solar PV installation, it's also excellent for installing HVAC equipment, antennas and satellite dishes – in fact, use Quick Mount PV to secure and protect every roof installation you put your name on.
Features of the Quick Mount PV QMFTM B Specialty Flat Tile Mount with Flashings - Bronze Anodized
- Raises array wiring off hot roof
- Patented waterproofing technology
- Works with all standard concrete tile roofs
- No tile cutting, no tile drilling
- Flashed at both the deck and tile level
- 100% IBC, UBC compliant
- Finish: Bronze Anodized
- All fasteners and hardware included
- All exposed hardware is stainless steel
- Meets or exceeds tile roofing best practices
- 10-year warranty; 50-year expected life
- Works with all leading racks
Available Finishes
- Aluminum mill
- Clear anodized
- Bronze anodized
Parts and Materials
Each Mount Kit Includes:
- Cast aluminum base plate, 5.5" x 3.5" x 0.5"
- 9" x 9" spun aluminum primary flashing
- 12" x 17" fitted aluminum top flashing
- 11/4" x 51/2" extruded aluminum extender post
- 11/4" x 51/2" extruded aluminum extender post
- Stainless steel bolt, 5/16" x 1"
- Four zinc-coated steel lag bolts, 1/4" x 11/2"
- EPDM rubber counter flash
- Sealing washer, 5/16" x 11/4"
- Fender washer, 5/16"
Also Known As:
QMFTM.B
QMFTM-B
QMFTM_B
QMFTMB
| Flashing size | 12" x 17" |
|---|---|
| Tools needed for installation |
|
| Applicable roof types | Standard or lightweight 12" x 17" flat concrete tile roof system with "exposed" surface width (not including left side gutter) between 10-3/4" and 12" wide, and length of 17", +/- 1/2". If the roof tile dimensions do not fall within these guidelines, use a Quick Mount Universal Tile Mount instead. |
| Available finishes |
|
| Compatible racks |
