Quick Mount PV QMFTM A Specialty Flat Tile Mount - Mill
[QMFTM B, QMFTM.B, QMFTM-B, QMFTM_B, QMFTMB]
Quick Mount PV QMFTM A Specialty Flat Tile Mount - Mill
QMF™ A Specialty Flat Tile Mount - Mill
Quick Mount PV's Specialty Flat Tile Mount dramatically reduces the time and effort needed to double flash flat tile roof penetrations. For flashing at the tile level, Quick Mount PV has pre-fabricated an aluminum "tile" designed to drop directly into a standard 12" x 17" flat tile roof. Just replace the tile; there's no tile drilling or cutting. Some mounts will require attachment to blocking where rafter does not align with center.
Features of the Quick Mount PV QMFTM A Specialty Flat Tile Mount - Mill
- Works with all standard concrete tile roofs
- Flashed at both the deck and top level
- Meets or exceeds tile roofing best practices
- All fasteners and hardware included
- All exposed hardware is stainless steel
- Mill finish
- 10-year warranty; 50-year expected life
- 100% IBC compliant
- No tile cutting, no tile drilling
- Works with all leading racks
- Patent number 7,861,485
Also Known As:
QMFTM.B
QMFTM-B
QMFTM_B
QMFTMB
| Flashing size | 12" x 17" |
|---|---|
| Tools needed for installation |
|
| Applicable roof types | Standard or lightweight 12" x 17" flat concrete tile roof system with "exposed" surface width (not including left side gutter) between 10-3/4" and 12" wide, and length of 17", +/- 1/2". If the roof tile dimensions do not fall within these guidelines, use a Quick Mount Universal Tile Mount instead. |
| Available finishes |
|
| Compatible racks |
Note: Specifications and pricing of the Quick Mount PV QMFTM A Specialty Flat Tile Mount - Mill subject to change without notice. Illustrations and descriptions of the Quick Mount PV QMFTM B do not claim to be complete or exhaustive.
