Quick Mount PV QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized


We recently made changes to our inventory of products and decided to no longer carry this item.

If you are still interested in purchasing the Quick Mount PV QMCC B please use the following Amazon product link.

Quick Mount PV QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized

Doing so will help us continue to employ our wonderful staff that works hard to support every customer everyday.

With warmest regards,

Infinigi Staff

Quick Mount PV QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized

QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized

We've designed these mounts to lift conduit off the roof to protect wiring from overheating. These mounts use our proprietary waterproofing technology to seal the roof penetrations and we use aluminum and stainless steel parts to secure the conduit for the life of the system. Available for composition and wood shake roofs.

Conduit Mounts measure 9" x 12". Finishes available include aluminum mill, bronze anodized, and clear anodized. Uses a standard single-hole conduit clamp for 1/2" through 1-1/2" conduits. Conduit clamp not included.

Features of the Quick Mount PV QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized

  • Raises array wiring off hot roof
  • Patented waterproofing technology
  • All-aluminum pre-flashed mount
  • One-bolt installation
  • Works with composition and shake roofing
  • No shingle cutting
  • Finish: Bronze Anodized
  • Stainless steel hardware (included)
  • 100% IBC, UBC compliant
  • Meets or exceeds roofing industry best practices
  • Won't void roof manufacturer's warranty

Available Finishes

  • Aluminum mill
  • Clear anodized
  • Bronze anodized

Parts and Materials

Each Mount Kit Includes:

  • Aluminum mounting block (3/4" x 1-1/4" x 2-1/4") attached to .04" thick, 9" x 12" aluminum flashing using weld-free bond
  • 1/4" by 2-1/2" lag bolt
  • Stainless/EPDM sealing washer, 1" x 5/16"

Also Known As:
QMCC.B
QMCC-B
QMCC_B
QMCCB

Flashing size 9" x 12"
Tools needed for installation
  • Tape measure
  • Roofers bar/shingle ripper
  • Stud finder
  • Caulking gun
  • Appropriate sealant
  • Drill with 3/16" bit
  • Drill or impact gun with deep 7/16" socket
Applicable roof types Standard and high-definition composition roofs with 5" to 5-1/2" courses; clamps for conduit measuring 1/2" to 1-1/2" in diameter (clamps not included).
Available finishes
  • Aluminum mill
  • Clear anodized
  • Bronze anodized

 

Note: Specifications and pricing of the Quick Mount PV QMCC B Flashing Conduit Mount-Comp. 9 x 12 Bronze Anodized subject to change without notice. Illustrations and descriptions of the Quick Mount PV QMCC B do not claim to be complete or exhaustive.
Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Quick Mount PV
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter