OutBack Power PSDC-100 Power System DC Disconnect

The OutBack Power PSDC-100 Power System DC Disconnect is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff

OutBack Power PSDC-100 Power System DC Disconnect

PSDC-100 Power System DC disconnect with 100A up to 4 inverters

OutBack Power PSDC-100 DC Power System

OutBack Power Systems has developed a new solution for all of the DC components of a renewable energy power conversion system. The OutBack PSDC saves time, money and space by combining the disconnects, overcurrent protection devices, grounding and control components into an easy to install, single enclosure. The OutBack PSDC is easily modified and expanded as your system grows or changes.

Standard Features and Components for the OutBack PSDC

•   ETL listed indoor type powdercoated steel enclosure with plenty of conduit knockouts

•   Mounting space for up to four large 1.5" wide 175 or 250 amp or six medium 1.0" wide 60 to 100 amp breakers - sizes can be mixed

•   Ten spaces for small 0.75" wide 15, 30 or 60 amp breakers and OBDC-GFP/2 (uses 3 spaces)

•   500 amp 50 mV current shunt standard

•   Battery negative/ground bus bar standard

•   Battery positive bus bar for DC loads and PV arrays included standard

•   Designed to mount directly to the DC end of   1 or 2 Trace DR or SW series inverters without needing additional conduit boxes or fittings

•   Easily connected to other inverter models and enclosures via conduit or raceway

•   Knockouts on top for two RVPP Solar Boost or three C-series controllers

•   Available with or without the circuit breakers and other options pre-installed

•   For negative or positive ground systems


Optional Components  

•  15, 30, 60, 100, 175 & 250 amp DC rated breakers for DC inputs/loads and power inverters

•  OBDC-GFP/2 - Dual 60 amp PV ground fault protection system for two PV charge controller. Multiple DC-GFP/2 can be used on the same system - up to four can be installed in a PSDC

•  CCB - Charge controller bracket for up to three  additional C-series controllers on either side

•  TBB - Insulated terminal bus bar kit for combining or distributing multiple circuits

•  GBB - Ground bus bar kit for isolating the negative from ground (included with GFP/2 system).  

•  VREA - Adapter plates for direct connection of a PSDC to one Vanner RE inverter/charger

•  PSA - Adapter plate for direct connection of a PSDC to one PS series inverter/charger

•  MP - Mounting Plate for assembling a complete power system - 36" wide x 50" wide x 1" thick

- for one PSDC, one PSAC and one or two inverter/chargers - split design to allow UPS shipping

Physical Dimensions

•   PSDC enclosure:  16" wide x 9" deep x 32.5" tall  (40.6cm x 22.8cm x 82.5cm)

•   Shipping size:  12.75" x 36" x 19.5"   Weight:  38 pounds  (17.3 kG) + options

PS4DC Breaker Configurations
The PS4DC Breaker Panel has ten small .75" (19 mm), up to six medium 1" (26 mm) or four large 1.5" (32 mm) breaker positions. The small sizes are 1-80 amps, medium sizes are 100 or 125 amps an the large sizes are 175 or 250

Also Known As:
PSDC 100

Note: Specifications and pricing of the OutBack Power PSDC-100 Power System DC Disconnect subject to change without notice. Illustrations and descriptions of the OutBack Power PSDC-100 do not claim to be complete or exhaustive.

Customers Who Bought the OutBack Power PSDC-100 Power System DC Disconnect Also Purchased:

PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
OutBack Power
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter