OutBack Power PS2DC-250 Power System DC
[PS2DC-250, PS2DC.250, PS2DC 250, PS2DC_250, PS2DC250]
OutBack Power PS2DC-250 Power System DC
PS2DC-250 Power System DC w/250A breaker for up to 2 invertersOutBack Power PS2DC-250 Power System DC Disconnect
Power System 2 (PS2)
OutBack Power offers compact enclosures for all of the AC and DC components of a renewable energy power conversion system. The PS2 series saves time, money and space by combining the disconnects, over-current protection devices and control components into easy-to-install enclosures. Capable of supporting one or two OutBack FX series inverter/chargers, up to three MX60 charge controllers, a MATE system controller and all the associated AC and DC components.
The OutBack PS2 series can be fully customized to your application and ordered pre-wired or as individual components for field assembly.
PS2DC Breaker Panel
The PS2DC is a code-compliant steel enclosure engineered to contain all DC power routing and management components.
• ETL listed indoor type powder coated enclosure with plenty of conduit knockouts
• Knockouts for one additional inverter battery breaker and eight 3/4" (19 mm) breakers
• 500 amp 50 mVolts DC current shunt standard • Battery negative/ground bus bar standard
• Battery positive bus bar for DC loads and PV arrays included standard
• Knockouts for battery conduit, MX60 interconnect and stacking another PS2DC
• Use for negative or positive ground systems
• Knockouts on five surfaces to facilitate conduit - inverter connections and additional MX60s
Image Shown with DC breakers and DC-GFP/2 - order separately
PS2AC and PS2DC Breaker Panel Specification
Model | Standard Breakers | Dimensions Unit (H x W x D) | Dimensions Shipping (H x W x D) | Weight Unit |
PS2AC-50D | 50 amp 120/240 VAC 60 Hz Bypass assembly | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 22 lbs (10 kg) |
PS2AC-50DE | 50 amp 120/230 VAC 50 Hz Bypass assembly | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 22 lbs (10 kg) |
PS2AC | No breakers included | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 20 lbs (9 kg) |
PS2DC-175 | 175 amp DC Breaker | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 22 lbs (10 kg) |
PS2DC-250 | 250 amp DC Breaker | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 22 lbs (10 kg) |
PS2DC | No Breakers included | 18.5 x 11.5 x 9" (47 x 29 x 23 cm) | 22 x 15 x 12" (56 x 38 x 30 cm) | 20 lbs (9 kg) |
OutBack PS2AC Bypass Assemblies Specifications
- for field installations in bare PS2AC version
Model | Inverter Output | Bypass Breaker Rating | Input Breaker Rating | Output Breaker Rating |
PS2-IOB-50D | 120/240 VAC 60 Hz | 50 amps at 120/240 VAC | 50 amps at 120/240 VAC | 50 amps at 120/240 VAC |
PS2-IOB-50DE | 230 VAC 50 Hz | 50 amps at 230 VAC | 50 amps at 230 VAC | 50 amps at 230 VAC |
| PS2 DC Breaker Configurations | The PS2DC Breaker Panel has eight small .75" (19 mm), three medium 1" (26 mm) or two large 1.5" (32 mm) breaker positions. The small sizes are 1-80 amps, medium sizes are 100 or 125 amps an the large sizes are 175 or 250 amps. |
 | |
PS2 Mounting Plate (PSMP)
The PS2MP is a steel powder coated, one-part mounting plate for all your PS2 series accessories and up to two OutBack Inverter/Chargers.
Model | Dimensions Unit (H x W x D) | Dimensions Shipping (H x W x D) | Weight Shipping |
PS2MP | 20 x 44 x .75" (51 x 112 x 2 cm) | 22.25 x 49.5 x 3" (56 x 126 x 8 cm) | 24 lbs (10.8 kg) |
Also Known As:
PS2DC.250
PS2DC 250
PS2DC_250
PS2DC250
Recommended Products for the OutBack Power PS2DC-250 Power System DC
Customers Who Bought the OutBack Power PS2DC-250 Power System DC Also Purchased:
