OutBack Power Flexpower One FP1-5 Fully Pre-Wired Single Inverter System

OutBack Power Flexpower One FP1-5 Fully Pre-Wired Single Inverter System

Flexpower One FP1-5 Fully Pre-Wired Single Inverter System

The new FLEXpower ONE System accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, chalets, homes, remote communication sites and back-up power systems. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and factory tested FLEXpower ONE System is designed for a quick installation, saving both time and money. The OutBack Power FLEXpower ONE System is the only choice when you need a fully integrated, true sinewave, reliable power system.

Applications
The FLEXpower ONE is intended for on-grid, off-grid, and grid-interactive applications. It is designed to use photovoltaic (PV) panels to harvest solar energy and a battery bank to store the harvested energy.

On-Grid Applications
In on-grid applications, the FLEXpower ONE can use the grid power as the primary power source or as the backup source of power. If the FLEXpower ONE is used as backup to the grid, the FLEXpower ONE will take over when the grid fails. If the FLEXpower ONE is used as the primary source, the grid power will be used when the batteries have been drained. In this situation, the AC power or PV harvest can be used to recharge the battery bank.

Off-Grid Applications
In off-grid applications, the FLEXpower ONE can use the harvested energy from the battery bank as the primary power source. An AC generator can also be connected to support the system when required.

Includes
FLEXpower ONE includes a single inverter, AC and DC wiring boxes, a single FLEXmax Charge Controller, MATE, HUB, FLEXnet DC and Surge Protector while maintaining a small system footprint.

The FLEXpower ONE System is also equipped with battery and PV array breakers, a PV GFDI breaker, an Input-Output-Bypass Assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers. FLEXpower ONE components carry all of the necessary ETL Certifications allowing for a code compliant installation that saves both time and money while still looking great.

Features of the OutBack Power Flexpower One FP1-5 Fully Pre-Wired Single Inverter System:

Fully Pre-Wired System
3.5 kW and 3.6 kW units
120 Vac/60 Hz configurations and 230/50 Hz configurations
Charge controller uses MPPT technology to maximize the harvest from solar modules
Fast Installation
Rated for Indoor Installations
Includes mounting bracket for wall-mounting
Field Configurable Settings
Optimized System Footprint
Ample AC and DC Breaker Provisions
Battery status monitor takes independent shunt measurements of PV and inverter power
Includes OutBack's Surge Protector for additional protection against damaging power surges
Grid-interactive capable (requires a configuration that features a GVFX Inverter)
Factory Tested

Also Known As:
FP1.5
FP1 5
FP1_5
FP15

Specifications
Prewired Systems*	Description
FP1-1	FLEXpower ONE, Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet, 250ADC breaker, GFDI, 80 amp charge controller breaker, VFX3524, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 120V 60Hz applications
FP1-2	FLEXpower ONE, Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet, 175ADC breaker, GFDI, 80 amp charge controller breaker, VFX3648, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 120V 60Hz applications
FP1-3	FLEXpower ONE, Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet, 250ADC breaker, GFDI, 80 amp charge controller breaker, GVFX3524, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 120V 60Hz applications
FP1-4	FLEXpower ONE, Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet, 175ADC breaker, GFDI, 80 amp charge controller breaker, GVFX3648, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 120V 60Hz applications
FP1-5	FLEXpower ONE, Prewired AC and DC boxes with 230VAC Bypass and Type F Outlet, 250ADC breaker, GFDI, 80 amp charge controller breaker, VFX3024E, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 230V 50Hz applications
FP1-6	FLEXpower ONE, Prewired AC and DC boxes with 230VAC Bypass and Type F Outlet, 175ADC breaker, GFDI, 80 amp charge controller breaker, VFX3048E, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 230V 50Hz applications
	Dimensions
Weight	Unit: 98 lbs (44.5 kgs) Shipping: 109 lbs (49.4 kgs)
Dimensions (H x W x L)	Unit: 12.88 x 19.69 x 33.44" (32.72 x 50.01 x 84.94 cm) Shipping: 17 x 22.75 x 38" (43.18 x 57.79 x 96.52 cm)

Important note for the OutBack Power Flexpower One FP1-5 Fully Pre-Wired Single Inverter System

Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.

Note: Specifications and pricing of the OutBack Power Flexpower One FP1-5 Fully Pre-Wired Single Inverter System subject to change without notice. Illustrations and descriptions of the OutBack Power FP1-5 do not claim to be complete or exhaustive.