MK Battery 6AVR95-15 Summary
- Voltage
- 12 V
- Amp Hours
- 791 Ah
- Height
- 9.48 in.
- Length
- 37 in.
- Width
- 27.12 in.
Mk Battery 6AVR95-15 Unigy II 12 Volt AGM Battery
6AVR95-15 Unigy II 12 Volt AGM Battery
The DEKA UNIGY II LINE features two module designs with a wide range of capacities and sizes to fit the requirements of renewable energy applications. These modules are constructed using the finest quality materials and state-of-the-art manufacturing techniques enhancing their performance in these demanding applications.
Deka Unigy II Interlock System
- Interlocking modules require only front access bolts for mounting, providing quick and safe installation.
- Modules are coated with acid resistant epoxy powder paint.
- Each module has mounting holes for grounding option.
- Standard one-piece base enables it to be used as anchoring template. Anchors can be drilled and installed with base in place.
- Certified to UBC 97 Zone 4 Top of Building up to 8 modules high.
Deka Unigy II Non-Interlock System
- Non-Interlock modules require front and rear access bolts for mounting, providing easy and safe installation.
- Modules are coated with acid resistant epoxy powder paint.
- Each module has mounting holes for grounding option.
- Standard two-piece base enables anchors to be drilled and installed with base in place.
- Certified to UBC 97 Zone 2B Top of Building up to 8 modules high.
Features of the Mk Battery 6AVR95-15 Unigy II 12 Volt AGM Battery:
- Air gap between cells has been designed to reduce foot print while maintaining required cooling.
- Front safety shield design easily clips on and off without tools for quicker assembly.
- Two-way post design is lead plated solid copper providing a large contact area with front access bolting for easier installation and maintenance.
- Microcat vent improves high temperature performance (standard on 95 model only).
- Two-piece base meets UBC 97 Zone 2B top of building requirements – zone 4 certified to 8 modules high on ground level.
- One-piece base meets UBC 97 Zone 4 top of building requirements – certified to 8 modules high, severity level 52.
- Patented design (Interlock module only) allows for front access bolting – rear bolting is eliminated.
- Tank formed plates allow systems to be shipped at 100% rated capacity.
- Pure lead (99.2%) positive grid alloy is very resistant to corrosion/growth.
- Collapsible bottom bridge accommodates for normal plate growth, reducing stress on battery post seals.
- AVR95 cell delivers up to 28% more power in the same space compared to larger competitor models while maintaining a 20-year design life.
Cell Construction
- Lead plated copper posts with large contact area
- Polypropylene cover and jar (UL 94 V-0 optional)
- Pure lead (99.2%) positive grid alloy
- Tank-formed plates (All cells shipped at 100% capacity.)
- Tear guard
- All seals 100% air and water tested
- Epox-z post seal - tested to 80°C (176°F)
- Microcat vent
- Hovosorb II glass mat separators
- Collapsible bottom bridge
Part number terminology example
Deka/MK Battery Unigy II 6AVR95-15
The 6 is the number of 6 volt cel ls.
AVR means Absorbed Valve Regulated technology.
15 is the number of plates in each cell.
Also Known As:
6AVR95.15
6AVR95 15
6AVR95_15
6AVR9515
Capacity at C/20: | 791 AH |
Separators | Microporous Glass Mat |
Positive & Negative Plate | Lead tin |
Self-Discharge | Less than 2% per month stand loss means little deterioration during transport and storage |
Container/Cover | Impact-Resistant Polypropylene, UL 94 V-0, 28% L.O.I. |
Individual Plate Formation | Shipped at 100% Capacity |
Cycle Life | 2400 cycles @ 20% DOD |
Dimensions(L x D x H) in(mm) | 37" (940) x 27.12" (689) x 9.54" (242) |
Important note for the Mk Battery 6AVR95-15 Unigy II 12 Volt AGM Battery
Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please
Contact Us and we will work to get you the exact shipping cost.