Magnum Energy PT-100 MPPT Charge Controller
[PT-100, PT.100, PT 100, PT_100, PT100]
Magnum Energy PT-100 Summary
- Product Type
- Charge Controller
- Battery Voltage
- 24 Volts
- Battery Voltage
- 12 Volts
- Battery Voltage
- 48 Volts
- Charging Type
- MPPT
- Output Current
- 100 Amps
- PV Open Circuit Voltage
- 187 Voc
- PV Input @ 12V
- 1200 Watts
- PV Input @ 24V
- 2400 Watts
- PV Input @ 48V
- 4800 Watts
- Display Included
- Yes
Magnum Energy PT-100 MPPT Charge Controller
PT-100 MPPT Charge Controller
The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries. The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current to 100 amps and battery voltage to fully charge the battery.
Features of the Magnum Energy PT-100 MPPT Charge Controller:
- 150 operating voltage
- Max current out: 96 amps
- PT-100 provides typical 99% conversion efficiency and uses less than four watts of power in nighttime mode.
- MPPT: Maximum Power Point Tracking technology for increased PV power output efficiency.
- Voltage Options: Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage. The PT-100 will produce up to 100 amps regardless of battery voltage.
- A single controller supports a large PV array up to 6600W. Larger PV arrays may be used because the PT-100 is current limited to 100 amps for maximum harvest.
- Automatic battery temperature compensation using an included external temperature sensor for optimum battery charging, even during extreme temperature changes.
- GFDI: Integrated PV Ground- Fault Detection and Interruption/ Indication, with pre-fault leakage/ diagnostic metering.
- Maximizes system performance and improves battery life.
- Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
- Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.
- AFCI: An integrated PV Arc- Fault Circuit Interrupter detects, indicates, and extinguishes series arcs.
- The PT-100 is designed to work with a Magnum Panel (MP) or Mini- Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers.
- Weight: 13.6 lbs
Also Known As:
PT.100
PT 100
PT_100
PT100
| PT-100 | |
| Electrical Specifications | |
| Maximum PV input voltage (any condition) | 200 VDC + battery voltage or 240 VDC - whichever is lower |
| Maximum PV operating voltage | 187 VDC |
| Maximum PV array short circuit current | 100 ADC |
| Nominal battery voltage range | 12, 24, or 48 VDC |
| Battery charger output voltage range | 10 to 66 VDC |
| Continuous charger output current | 100 ADC (from -20 °C to +40 °C) with proportional power reduction up to 60 °C ambient |
| Maximum output power | 6600 watts |
| Efficiency | 99% typical |
| Tare loss / nighttime power consumption | <4 watts (fan off, display/LEDs off) |
| Charger regulation method | Automatic three-stage (bulk, absorption, float) charge with manual equalization |
| General Features & Capabilities | |
| Battery temperature compensation | With Battery Temperature Sensor (BTS) connected (battery temperature -20 °C to +55 °C) |
| Internal cooling | Using dual ball-bearing fans for long life |
| Overcurrent protection | With two overlapping circuits |
| Over-temperature protection | On transformer and MOSFETS |
| Listings | ETL Listed to UL/cUL 1741, CSA C22.2 #107.1-01, CE |
| Warranty | Five years parts and labor |
| Enviromental Specifications | |
| Operating temperature | -20° C to +60° C (-4° F to 140° F) |
| Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) |
| Operating humidity | 0 to 95% RH non condensing |
| Physical Specifications | |
| Enclosure type | Indoor, ventilated, with removable powder-coated conduit box |
| Unit dimensions (w x h x d) | 8.5” x 15.5” x 4.0” (21.6 cm x 39.4 cm x 10.2 cm) |
| Shipping dimensions (w x h x d) | 11.5” x 19.5” x 8.125” (29.2 cm x 49.5 cm x 20.6 cm) |
| Mounting | Mounted on a vertical surface (wall) or installed on MP or MMP enclosure |
| Weight | 13.6 lb (6.2 kg) |
| Shipping weight | 18 lb (8.2 kg) |
| Max operating altitude | 15,000’ (4570 m) |
Note: Specifications and pricing of the Magnum Energy PT-100 MPPT Charge Controller subject to change without notice. Illustrations and descriptions of the Magnum Energy PT-100 do not claim to be complete or exhaustive.
Customers Who Bought the Magnum Energy PT-100 MPPT Charge Controller Also Purchased:
Manufacturer Info
Share Product
