Magnum Energy MS4448PAE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac
MS4448PAE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac
The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-PAE Series provides two 120VAC output lines that are 180° out-of-phase with each other, so that the combination of the L1 and L2 lines total 240VAC and the voltage between either L1 or L2 and neutral is 120VAC, eliminating the need to purchase two units and stack them together to get 240 volts.
When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.
Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.
No stacking required: The unique design of the MS-AE Series can provide 120/240 volt output in one unit, eliminating the need to stack two units together to get 240 volts..
Power Factor Corrected (PFC) Charger: Magnum Energy PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger — using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-AE Series is ETL Listed to the stringent requirements of UL 1741 and CSA STD C22.2 No.107.1-01 for renewable energy installations.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Features of the Magnum Energy MS4448PAE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac:
|Input battery voltage range||18.0 - 34.0 VDC||36.0 - 68.0 VDC|
|Nominal AC output voltage||120/240 VAC split phase (± 5%)||120/240 VAC split phase (± 5%)|
|Output frequency and accuracy||60 Hz ± 0.1 Hz||60 Hz ± 0.1 Hz|
|Total Harmonic Distortion (THD)||< 5%||< 5%|
|1 msec surge current (amps AC)||Line-Neutral: 120, Line-Line: 70||Line-Neutral: 120, Line-Line: 70|
|100 msec surge current (amps AC)||Line-Neutral: 72, Line-Line: 40||Line-Neutral: 75, Line-Line: 40|
|5 sec surge power (real watts)||5800||8500|
|30 sec surge power (real watts)||5200||6000|
|5 min surge power (real watts)||4800||5400|
|30 min surge power (real watts)||4500||4800|
|Continuous power output at 25° C||4000 VA||4400 VA|
|Maximum continuous input current||266 A||144 A|
|Inverter efficiency (peak)||93%||94%|
|Transfer time||16 msecs||16 msecs|
|Search Mode||< 6 watts||< 6 watts|
|No Load (120 VAC output)||27 watts||25 watts|
|Waveform||Pure Sine Wave||Pure Sine Wave|
|Continuous output at 25° C||105 ADC||60 ADC|
|Power factor||> 0.95||> 0.95|
|Input current at rated output (AC amps)||15 AAC per leg at 120/240 VAC split phase||17.5 AAC per leg at 120/240 VAC split phase|
|General Features and Capabilities|
|Transfer relay capability||2 legs at 30A per leg transfer standard on all models|
|Five stage charging capability||Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™|
|Battery temperature compensation||With available temp sensor (battery temp 0 — 50° C)|
|Internal cooling||0 to 120 cfm variable speed drive using dual 92mm brushless DC fans|
|Overcurrent protection||Yes, with two overlapping circuits|
|Overtemperature protection||Yes on transformer, MOSFETS, and battery|
|Conformal coating on PCB's for corrosion protection||Yes|
|Powder coated chassis & top for corrosion protection||Yes|
|Stainless steel fasteners for corrosion protection||Yes|
|Listings||ETL Listed to ANSI / UL1741 and CSA STD C22.2 No.107.1-01|
|Warranty||Two years parts and labor|
|Operating temperature||-20° C to +60° C (-4° F to 140° F)|
|Nonoperating temperature||-40° C to +70° C (-40° F to 158° F)|
|Operating humidity||0 to 95% RH non condensing|
|Dimensions (l x w x h)||13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)|
|Mounting||Shelf or wall (no vents on bottom), MP or MMP panels|
|Unit Weight||55 lb (24.9 kg)|
|Shipping Weight||60 lb (27.2 kg)|
|Max operating altitude||15,000' (4570 m)|