Magnum Energy MS4448AE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac
[MS-4448AE, MS.4448AE, MS 4448AE, MS_4448AE, MS4448AE]
Magnum Energy MS4448AE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac
The MS-AE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-AE Series can provide 120 and 240 volts AC output in one unit, eliminating the need to stack two units together to get 240 volts.
Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-AE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.
The MS-AE 120/240V Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-AE Series is powerful, easy-to-use, and best of all, cost effective.
No stacking required: The unique design of the MS-AE Series can provide 120/240 volt output in one unit, eliminating the need to stack two units together to get 240 volts..
Power Factor Corrected (PFC) Charger: Magnum Energy PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger — using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-AE Series is ETL Listed to the stringent requirements of UL 1741 and CSA STD C22.2 No.107.1-01 for renewable energy installations.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Features of the Magnum Energy MS4448AE 4400 Watt, 48V Pure Sine Wave Inverter, 120/240Vac:
- Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Choices: The MS-AE Series comes in 24 and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile mounting: Mount the MS-AE Series on a shelf or wall.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The MS-AE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: The MS-AE Series comes with an on/off invertermounted switch with an easy-toread LED indicator.
- Expanded transfer relay: Two legs at 30A per leg transfer service is standard on all models.
- Buy with ease: The MS-AE Series is backed by a two-year (24-month) limited warranty.
Also Known As:
MS.4448AE
MS 4448AE
MS_4448AE
MS4448AE
| MS4024AE | MS4448AE | |
| Inverter Specifications | ||
| Input battery voltage range | 18.0 - 33.8 VDC | 36.0 - 67.6 VDC |
| Nominal AC output voltage | 120/240 VAC split phase | 120/240 VAC split phase |
| Output frequency and accuracy | 60 Hz ± 0.04% | 60 Hz ± 0.04% |
| Total Harmonic Distortion (THD) | < 5% | < 5% |
| 1 msec surge current (amps AC) | Line-Neutral: 120, Line-Line: 195 | Line-Neutral: 120, Line-Line: 160 |
| 100 msec surge current (amps AC) | Line-Neutral: 72, Line-Line: 92 | Line-Neutral: 75, Line-Line: 90 |
| 5 sec surge power (real watts) | 5800 | 8500 |
| 30 sec surge power (real watts) | 5200 | 6000 |
| 5 min surge power (real watts) | 4800 | 5400 |
| 30 min surge power (real watts) | 4500 | 4800 |
| Continuous power output at 25° C | 4000 VA | 4400 VA |
| Maximum continuous input current | 222 A | 122 A |
| Inverter efficiency (peak) | 93% | 94% |
| Transfer time | 16 msecs | 16 msecs |
| Search Mode | < 6 watts | < 6 watts |
| No Load (120 VAC output) | 27 watts Pure Sine Wave | 25 watts Pure Sine Wave |
| Waveform | ||
| Charger Specifications | ||
| Continuous output at 25° C | 105 ADC | 60 ADC |
| Charger efficiency | 85% | 85% |
| Power factor | > 0.95 | > 0.95 |
| Input current at rated output (AC amps) | 15 AAC per leg at 120/240 VAC split phase | 17.5 AAC per leg at 120/240 VAC split phase |
| General Features and Capabilities | ||
| Transfer relay capability | 2 legs at 30A per leg transfer standard on all models | |
| Five stage charging capability | Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ | |
| Battery temperature compensation | With available temp sensor (battery temp 0 — 50° C) | |
| Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans | |
| Overcurrent protection | Yes, with two overlapping circuits | |
| Overtemperature protection | Yes on transformer, MOSFETS, and battery | |
| Conformal coating on PCB's for corrosion protection | Yes | |
| Powder coated chassis & top for corrosion protection | Yes | |
| Stainless steel fasteners for corrosion protection | Yes | |
| Listings | ETL Listed to ANSI / UL1741 and CSA STD C22.2 No.107.1-01 | |
| Warranty | Two years parts and labor | |
| Environmental Specifications | ||
| Operating temperature | -20° C to +60° C (-4° F to 140° F) | |
| Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) | |
| Operating humidity | 0 to 95% RH non condensing | |
| Physical Specifications | ||
| Dimensions (l x w x h) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | |
| Mounting | Shelf or wall (no vents on bottom) | |
| Unit Weight | 54.5 lb (24.7 kg) | |
| Shipping Weight | 58 lb (26.3 kg) | |
| Max operating altitude | 15,000' (4570 m) | |
