Magnum Energy MS4124E 4100 Watt MS-E Series Pure Sine Wave Inverter/Charger
MS4124E 4100 Watt MS-E Series Pure Sine Wave Inverter/Charger
Magnum Energy now offers the MS-E Series Inverter/Charger for 230 VAC / 50 Hz installations. The MS-E Series comes with all of the features you've come to expect from a Magnum product, including:
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger — using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-E Series is listed to the stringent CE requirements, ensuring the inverter/charger is safe and reliable.
Easy-to-install: Install the MS-E Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Available For:
- Renewable
- Energy Systems
- Off-grid Power
- Back-up Power
- Marine Systems
- RV Systems
- Truck Systems
Features of the Magnum Energy MS4124E 4100 Watt MS-E Series Pure Sine Wave Inverter/Charger:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choices: The MS-E Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS-E Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS-E Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches:
The MS-E Series comes with an on/off inverter-mounted switch with an easy-to-read
LED indicator. Buy with ease: The MS-E Series is backed by a two-year (24-month) limited warranty.
Available Accessories:
- AGS
- Battery Monitor Kit
- Conduit Box
- DC Load Disconnect
- Fuse Blocks
- Remote - ME-RC
- Remote - ME-ARC
- Remote Switch Adapter
- Smart Battery Combiner
| Inverter Specifications | MS2712E | MS4124E |
| Input battery voltage range | 9 - 17 VDC | 18 - 34 VDC |
| Nominal AC output voltage | 230 VAC ±5% | 230 VAC ±5% |
| Output frequency and accuracy | 50 Hz ± 0.4 Hz | 50 Hz ± 0.4 Hz |
| Total Harmonic Distortion (THD) | < 5% | < 5% |
| 1 msec surge current (amps AC) | 45 | 65 |
| 100 msec surge current (amps AC) | 21 | 30 |
| 5 sec surge power (real watts) | 4100 | 6300 |
| 30 sec surge power (real watts) | 3750 | 5300 |
| 5 min surge power (real watts) | 3600 | 4750 |
| 30 min surge power (real watts) | 3500 | 4600 |
| Continuous power output at 25° C | 2700 VA | 4100 VA |
| Maximum continuous input current | 360 ADC | 273 ADC |
| Inverter efficiency (peak) | 0.86 | 0.9 |
| Transfer time | 16 mSec | 16 mSec |
| Search mode (typical) | 9 watts | 9 watts |
| No load (230 VAC output, typical) | 34 watts | 30 watts |
| Waveform | Pure Sine Wave | Pure Sine Wave |
Charger Specifications | ||
| Continuous output at 25° C | 125 ADC | 105 ADC |
| Charger efficiency (peak) | 0.83 | 0.88 |
| Power factor | > .95 | > .95 |
| Input current at rated output (AC amps) | 8.5 | 14 |
| General Features and Capabilities | ||
| Transfer relay capability | 30 amps AC | |
| Five stage charging capability | Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ | |
| Battery temperature compensation | Yes, 15 ft Battery Temp Sensor standard | |
| Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans | |
| Overcurrent protection | Yes, with two overlapping circuits | |
| Overtemperature protection | Yes on transformer, MOSFETS, and battery | |
| Conformal coating on PCB's for corrosion protection | Yes | |
| Powder coated chassis & top for corrosion protection | Yes | |
| Stainless steel fasteners for corrosion protection | Yes | |
| Listings | CE | |
| Warranty | Two years | |
Environmental Specifications | ||
| Operating temperature | -20° C to +60° C (-4° F to 140° F) | |
| Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) | |
| Operating humidity | 0 to 95% RH non condensing | |
Physical Specifications | ||
| Dimensions (l x w x h) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | |
| Mounting | Shelf (top or bottom up) or wall | |
| Weight | 53 lb (24.0 kg) | |
| Shipping weight | 58 lb (26.3 kg) | |
| Max operating altitude | 15,000' (4570 m) | |
