Magnum Energy ME-ARC50 Advanced Remote Control, Digital LCD Display w/ 50' Cable
ME-ARC50 Advanced Remote Control, Digital LCD Display w/ 50' Cable
The ME-ARC remote control allows you to monitor and customize the operating parameters for your Magnum inverter/charger. It is the same remote used on all Magnum inverter/charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series lines so there is no cross-platform confusion. The ME-ARC50 comes standard with a 50 foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The Magnum remote control includes all of the programming and operation functions included in an easy-to-use package.
Features of the Magnum Energy ME-ARC50 Advanced Remote Control, Digital LCD Display w/ 50' Cable:
Easy-to-read: The large LCD screen and at-a-glance LEDs display the inverter/charger status in a straightforward way. Soft keys give simple access to menus and a rotary encoder knob makes it easy to quickly scroll through menus and select settings.
Non-volatile memory: Critical settings are saved even if the power is disconnected.
No cross platform confusion: The ME-RC remote is the same remote used on all Magnum inverter/charger models in the ME, MS, MS-AE, RD, MM, and the MMS Series lines.
Multiple functional settings: The Remote offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus.
Adjustable settings include shore power input from 5 to 60 amps; AGS settings for voltage, temperature,quiet time, clock, and status;inverter and charger settings for search watts, battery bank size, battery type, charge rate, VAC dropout, contrast, and power saver; and tech settings for battery temperature, transformer and internal FETs, software revisions, and factory reset.
A standard 50' 4-wire, twisted pair cable allows for plenty of room to display the Remote with ease.
Also Known As:
ME.ARC50
ME ARC50
ME_ARC50
MEARC50
Two-line LCD display screen | Yes |
Adjustable search mode | 5 to 50 watts in 5 watt increments |
Low battery cutout settings | 9 to 12.2 VDC (12 volt), 18 to 24.4 VDC (24 volt), and 36 to 48.8 VDC (48 volt) |
Selectable battery bank sizes | 200 to 2500 amp-hours in 10 amp-hour increments |
Selectable battery charge profile | Flooded, AGM1, AGM2, and GEL type chemistries. Also includes custom voltage adjusment |
Adjustable charge rate | 0 to 100% in 10% increments |
Adjustable VAC dropout | 60 to 105 VAC |
Adjustable LCD contrast | Yes |
Factory reset | Resets to factory defaults (tech menu) |