Magnum Energy ME3112 3100 Watt 12V Modified Sine Wave Inverter / 160A Charger
ME3112 3100 Watt, 12V Modified Sine Wave Inverter / 160A Charger
Reliable Mobile Power from Magnum Energy
The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Model Number
Available for
Available Accessories
Features of the Magnum Energy ME3112 3100 Watt 12V Modified Sine Wave Inverter / 160A Charger
Specifications | ME2012 | ME2512 | ME3112 |
Inverter Specifications | |||
Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
Nominal AC output voltage | 120 VAC | 120 VAC | 120 VAC |
Output frequency and accuracy | 60 Hz ± 0.005% | 60 Hz ± 0.005% | 60 Hz ± 0.005% |
1 msec surge current (amps AC) | 60 | 100 | 120 |
100 msec surge current (amps AC) | 37 | 45 | 50 |
5 sec surge power (real watts) | 3700 | 5000 | 6000 |
30 sec surge power (real watts) | 3450 | 4500 | 4800 |
5 min surge power (real watts) | 3100 | 3500 | 3950 |
30 min surge power (real watts) | 2400 | 2900 | 3500 |
Continuous power output at 45° C | 2000 VA | 2500 VA | 3100 VA |
Rated input battery current | 191.0 ADC | 239.1 ADC | 296.5 ADC |
Inverter efficiency (peak) | 95% | 91% | 90% |
Transfer time | 16 msecs | 16 msecs | 16 msecs |
Search mode | .2 ADC | .2 ADC | .2 ADC |
No load (120 VAC output) | 0.87 ADC | 0.95 ADC | 0.97 ADC |
Waveform | Modified Sine Wave | Modified Sine Wave | Modified Sine Wave |
Charger Specifications | |||
Continuous output at 45° C | 100 ADC | 120 ADC | 160 ADC |
Charger efficiency | 85% | 85% | 85% |
Power factor | > .95 | > .95 | > .95 |
Input current at rated output (AC amps) | 15 | 18 | 21 |
General Features and Capabilities | |||
Transfer relay capability | 2 legs at 30 A for 120 V/30 A or 240 V/60 A service | ||
Five stage charging capability | Bulk, Absorb, Float, Equalize, and Battery Saver™ | ||
Battery temperature compensation | With available temp sensor (battery temp 0 — 50° C) | ||
Remote inverter on/off switch | With available pigtail to connect to dry contact | ||
Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans | ||
Overcurrent protection | Yes, with two overlapping circuits | ||
Overtemperature protection | Yes on transformer, MOSFETS, and battery | ||
Conformal coating on PCB's for corrosion protection | Yes | ||
Powder coated chassis & top for corrosion protection | Yes | ||
Stainless steel fasteners for corrosion protection | Yes | ||
Dual AC branch rated output breakers | Optional on the ME2012 - AC breakers in 15 or 20 amp ratings | ||
Series stacking interface 120/240 V | Yes | ||
Listings | ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 | ||
Warranty | Three (3) years | ||
Environmental Specifications | |||
Operating temperature | -20° C to +60° C (-4° F to 140° F) | ||
Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) | ||
Operating humidity | 0 to 95% RH non condensing | ||
Physical Specifications | |||
Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | ||
Mounting | Shelf (top or bottom up) or bulkhead (vents up) | ||
Weight | 38 lb (17 kg) | 42 lb (19 kg) | 45 lb (20 kg) |
Max operating altitude | 15,000' (4570 m) |