Iota Engineering DLS-75 Battery Charger 12V
List Price: $466.00
You Save:$139.32 (29.9%)

Iota Engineering DLS-75 Battery Charger 12V

DLS-75 Battery Charger 12V

The DLS-75 battery charger/power converter from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 D.C voltage for both DC load operation and 12V battery charging. As a power supply, the unit's tightly controlled regulation allows the user to operate any appropriate nominal D.C. load up to the converter's rated output current. As a battery charger, the DLS-75 will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.

The DLS-75 provides AC/DC conversion up to 75 amps and features a Dual Voltage Jack, allowing the user to manually select between 13.6V and 14.2V charging.

The DLS series power converter/battery charger is designed with high quality components to help ensure years of continuous use. The DLS series is protected by multiple protection features for a long, trouble-free life.

Features of the Iota Engineering DLS-75 Battery Charger 12V:

  • Switch-Mode Technology
  • Exceptionally clean DC output
  • Reverse Battery Polarity Protection
  • Brown-Out Input Protection
  • Over-Current Protection - cycle by cycle peak limiting as well as rated current limiting to maximize the life of the converter.
  • Over-Temperature Protection
  • Lower operating temperature
  • Proportional fan control circuitry allows fan to start and stop slowly for quiet fan operation
  • External fuse protection
  • Charging Jack allows for normal and high-stage charging
  • Compatible with IOTA IQ Smart Charger for automatic three-stage charging
  • Warranty: 2 years (This warranty is valid only in the continental United States and Canada)

Also Known As:
DLS 75

DC Output Voltage (No Load) approx.13.6 V (DC)
Output Voltage Tolerance (No Load)+ or - .7%
Output Amperage, Max Continuous75 Amps
Output Voltage (Full Load) approx.>13.4 V (DC)
Maximum Power Output, Continuous1000 Watts
Ripple and Noise<100 mV rms
Input Voltage Range108 - 132 VAC
Input Voltage Frequency47 - 63
Maximum AC Current @ 108Vac17 Amps
Typical Efficiency>80%
Max Inrush Current, Single Cycle50 Amps
Short Circuit ProtectionYes
Overload Protection>100%
Line Regulation100 mV rms
Load Regulation<1.5%
Fan ControlProportional
Thermal ProtectionYes
Working Temperature Range0 - 40C
Storage Temperature-20 to 80C
Withstand Voltage1240V @ leads
Dimensions13" x 6.5" x 3.4"
Weight 7.8 lbs
Note: Specifications and pricing of the Iota Engineering DLS-75 Battery Charger 12V subject to change without notice. Illustrations and descriptions of the Iota Engineering DLS-75 do not claim to be complete or exhaustive.

Customers Who Bought the Iota Engineering DLS-75 Battery Charger 12V Also Purchased:

PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Iota Engineering
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter