Grundfos 3" SQ 5SQ05-180 Submersible Pump - 115V
3" SQ 5SQ05-180 Submersible Deep Well Pump 100-115VDC, 0.5HP, 50/60HZ
The Grundfos SQ pump 3" submersible pump range offers a wide performance range, you're sure to find a model that will suit your individual requirements.
The SQ is a compact 3" multistage centrifugal pump that allows you to install it in a borehole as small as itself. With the built-in electronics, the SQ family is very easy to install and operate. And it guarantees a reliable water supply at all times.
Equipped with the permanent magnet motor, the flexible and compact pump range offers excellent efficiencies and delivers up to 200m pump head. Connecting your SQ pump to the Grundfos CU301 control box, furthermore offers the possibility of creating a constant pressure water supply.
This is the ideal pump to use if you are pumping from a well and into a pressure tank, especially for solar-powered homes. They work on modified sine wave or sine wave inverters. Highest volume pumps run on 240VAC. They can be powered by inverter systems with 240VAC output, or by using an autotransformer to step 115 VAC from an inverter to 240 to run the pump. Minimum well diameter of 3 inches is required. Use 2-conductor with ground pump cable.
Application:
SQ pumps are suitable for both continuous and intermittent operation for a variety of applications:
Features of the Grundfos 3" SQ 5SQ05-180 Submersible Pump - 115V
Pumped liquids
SQ pumps are designed for pumping thin, clean, non-aggressive and non-explosive liquids, not containing solid particles or fibres. SQ and SQE are suitable for pumping liquids with a content of sand up to 50 g/m3. A higher content of sand will shorten pump life.
Also Known As:
5SQ05.180
5SQ05 180
5SQ05_180
5SQ05180
Technical Data | SQ/SQE |
Supply Voltage: | 1x200-240V +6%/-10%, 50/60 Hz, PE 1x100-115V +6%/-10%, 50/60 Hz, PE |
Operation Via Generator: | As a minimum, the generator output must be equal to the motor P1[kw] + 10% |
Starting Current: | The motor starting current is equal to the highest value stated on the motor nameplate |
Starting: | Soft Start |
Run-up Time: | Maximum: 2-seconds |
Motor Protection: | Motor is protected against: Dry running, overvoltage, undervoltage, overload, overtemperature |
Power Factor: | PF=1 |
Motor Cable: | 3 Wire, 14AWG XLPE. Length; 5 feet |
Motor Liquid: | Type SML 2 |
pH Values: | SQ and SQE: 5 to 9 |
Liquid Temperature: | The temperature of the pumped liquid must not exceed 104°F |
Note: If liquids with a viscosity higher than that of water are to be pumped, please contact Grundfos | |
Piping Connection | |
Discharge Port: | 5SQ/SQE - 1” NPT |
10-15SQ/SQE - 1-1/4” NPT | |
22-30SQ/SQE - 1-1/2” NPT | |
Storage Conditions | |
Minimum Ambient Temperature: Maximum | -4°F |
Maximum Ambient Temperature: | +140°F |
Frost Protection: | If the pump has to be stored after use, it must be stored at a frost-free location or it must be ensured that the motor liquid is frost proof. |
Operating Conditions | |
Minimum Ambient Fluid Temperature: | + 32°F |
Maximum Ambinet Fluid Temperature: | +104°F |
Approximate Dimensions and Weight | |
Motor Dimensions (MS 3 & MSE 3): | |
0.50 [Hp] x | 20.9” length x 2.68 diameter |
0.75 [Hp] | 20.9” length x 2.68 diameter |
1.0 - 1.5 [Hp] | 22.3” length x 2.68 diameter |
Motor Weights (MS3 & MSE3) | |
0.50 [Hp] | 6.0 lbs |
0.75 [Hp] | 7.1 lbs |
1.0 - 1.5 [Hp] | 8.2 lbs |
Pump End Dimensions: | |
Pump Diameter: | 2.68 |
Pump Diameter, incl cable guard | 2.91 |
Pump End Dimensions (min. and max.): | |
5SQ/SQE | 10.6” to 18.0” |
10SQ/SQE | 10.6” to 14.8” |
15SQ/SQE | 10.6” to 16.9” |
22SQ/SQE | 10.6” to 16.9” |
30SQ/SQE | 10.6" to 13.7" |
Pump End Weights (min. and max.): | |
All SQ/SQE Models | 2.2 lbs to 3.5 lbs |
Well Diameter: | Minimum 3" |
Installation Depth (maximum) | 500 feet below static water level |