Enphase Energy D380-72-208-S13 Inverter - Twin Module 208VAC with Tyco Connector
D380-72-208-S13 Inverter, Twin module 208VAC, Tyco connector
The Enphase Microinverter shifts DC to AC conversion from a large, centralized inverter to a compact unit attached directly to each solar module in the power system. Distributing the conversion process to each module makes the entire solar power system more productive, reliable, and smarter than traditional inverter systems.
Solar Power Challenges
Solar power production is affected by various factors such as module mis-match, obstruction shading, inter-row shading, and obstacles such as dust or debris. In addition, non-uniform changes in temperature, irradiance, and shading create complex current-voltage curves, further affecting energy harvest. This is due to the fact that in traditional systems the performance of the entire system is dictated by the performance of the weakest module.
The Enphase Solution
The Enphase Energy Microinverter System solves solar power challenges by performing Maximum Power Point Tracking (MPPT) at each solar module. MPPT is an algorithm used to calculate and respond to temperature and light changes detected on a solar power system, and to determine how much power to draw from the module. In contrast, centralized inverter's MPPT algorithm sees the entire solar power system as a single module, and responds to the lowest production numbers it detects.
The Enphase MPPT algorithm works at each solar module in an installation and achieves greater than 99.6% accuracy which enables it to maximize energy harvest at all times, even during variable light conditions. Tests show systems using Enphase Microinverters increase energy harvest by as much as 25% over systems using traditional inverters.
Traditional centralized inverters implementations create a single point of failure for solar power systems. If the inverter fails, the entire system is disabled. Enphase Microinverters convert power independently at each solar module. If one microinverter fails, the rest continue to operate as usual. Also, if a microinverter is damaged or fails, it can be replaced during routine maintenance or when convenient, further reducing maintenance costs.
Reduced Operational Costs
With the Enphase Microinverter System, installers are no longer limited by string design, marginal designs, co-planarity, and matched modules. The space, heat, and noise associated with a large inverter are eliminated. Enphase Microinverter Systems improve mechanical integration, reduce wiring time, and remove the need for DC switching points.
Another benefit of the distributed microinverter design is the potential for installations to be expanded over time. An initial set of solar modules can be installed and additional modules added as needs and budgets grow without requiring the replacement of a large centralized inverter.
Compliance and Reliability
The Enphase Microinverter is CSA Listed per UL1741 and can withstand surges of up to 6kV. Enphase Microinverter Systems undergo rigorous testing including HALT and HASS, ensuring reliability.
Features of the Enphase Energy D380-72-208-S13 Inverter - Twin Module 208VAC with Tyco Connector:
Also Known As:
D380 72 208 S13
|60 AND 72 Cell Modules|
|The D380 "TwinPack" microinverters contain 2 independent DC inputs. The Input Data (DC) values below apply to both DC Inputs A and B individually|
|Input Data (DC)||D380-72-2LL-S12/3||D380-72-2LL-S12/3-NA|
|Recommended input power (STC)||230W|
|Maximum input DC voltage||56V|
|Peak power tracking voltage||22V — 40V|
|Min./Max. start voltage||28V/54V|
|Max. DC short circuit current||12A|
|Max. input current||10A|
|Output Data (AC)||@208 Vac||@240 Vac|
|Maximum output power||380W||380W|
|Nominal output current||1.8A||1.6A|
|Maximum units per 20A branch||15||10|
|Peak inverter efficiency||95.5%|
|CEC weighted efficiency||95.0%|
|Nominal MPP tracking||99.6%|
|Operating temperature range||-40ºC to +65ºC|
|Night time power consumption||50mW|
|Dimensions (WxHxD)||12.25" x 6.00" x 1.33"|
|Cooling||Natural Convection — No Fans|
|Enclosure environmental rating||Outdoor — NEMA 6|
|Compliance||UL1741/IEEE1547, FCC Part 15 Class B|