DPW Power-Fab Battery Cabinet Enclosure for 4 x L-16 Batteries
Battery Cabniet Enclosure for 4 x L-16 Batteries
- Enclosed cabinets for indoor battery banks
- Holds four L-16 sized batteries (Not Included)
- These strurdy, attractive cabinets minimize floor space used and allow easy access for maintenance.
- The frame is welded steel angle with a polyester powder-coat finish.
- Venting of hydrogen gas to the outside of the building is done with installer-supplied 1" PVC pipe
- The cabines are sized to allow a 1" space between each battery to promote air movement and eliminate hot spots.
- A fitting is supplied with the cabinet that enables connection of the pipe to the top panel.
Battery Cabinet for L-16 Batteries |
No. of Batteries | Configuration | Dimensions (D x L x H) |
4 | 1 levels, 4 side-by-side | 14" x 35" x 32" |
8 | 1 levels, 8 side-by-side | 14" x 65" x 32" |
8 | 2 levels, 4 side-by-side | 14" x 35" x 65" |
12 | 2 levels, 6 side-by-side | 14" x 57" x 65" |
12 | 3 levels, 4 side-by-side | 14" x 35" x 84" |
16 | 2 levels, 8 side-by-side | 14" x 65" x 65" |
24 | 3 levels, 8 side-by-side | 14" x 65" x 83" |
Also Known As:
DPW.L16.4
DPW L16 4
DPW_L16_4
DPWL164
Important note for the DPW Power-Fab Battery Cabinet Enclosure for 4 x L-16 Batteries
Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please
Contact Us and we will work to get you the exact shipping cost.