DC175 175A Breaker with Enclosure


The DC175 175A Breaker with Enclosure is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff


DC175 175A Breaker with Enclosure

DC175 175 Amp Breaker with Enclosure

Xantrex DC175 175A Breaker with Enclosure

Xantrex makes DC input safety a simple matter with our complete line of DC disconnects and breakers. The high amperage DC breaker is housed within a powder coated enclosure with conduit knockouts for SW and DR series inverter connection. Our DC disconnects are simple to install and meet all electrical code requirements for appropriate circuit protection.

DC disconnects are expandable, allowing an additional 175 or 250 amp inverter breaker to be installed for dual inverter installations. DC input/output breakers for PV, charge controllers, or DC loads can also be filed installed in a DC175 or DC250.

Features of the Xantex DC175

Battery Disconnect: An easy way to isolate inverter and battery

  • Meets National Electrical Code requirement for "means of disconnection."
  • No exposed "hot" terminals
  • Doesn't need ring terminal lugs

Overcurrent protection: DC circuit breakers UL listed for up to 125 VDC

  • Extremely low voltage drop (less than most fuses or current shunts)
  • Rated for interrupting high fault current (up to 25,00 amps at 65 VDC)
  • Easy to reset
  • No exposed "hot" terminals

Room for expansion

  • Optional second main breaker accommodates dual inverter systems
  • Second breaker can be field installed
  • Space allows for DC current shunts

Optional bonding block simplifies wiring and grounding

  • Bonds negative conductor to grounding system at single point
  • Lugs to terminate four 4/0, two #1/0, two #2 and four #4 cables

Four Auxiliary breaker positions

  • Optional 15-amp DC breaker for small DC loads or equipment room light
  • Optional 60-amp DC-rated breaker for PV array disconnect, charge controller, etc.
  • UL listed for DC systems up to 125 VDC
  • Rated for interrupting high fault current, up to 25,000 amps at 65 VDC
  • Easily accessible #10-32 stud terminals

 

Disconnect and Breaker Options

  • DC250: 250 amp breaker with enclosure
  • DC175: 175 amp breaker with enclosure
  • GJ250: Additional 250 amp breaker (field installable)
  • DCBB: Negative/ground bonding block. Connects up to two #4/0 AWG negative cables and grounding system
  • CD60DC: 60 amp circuit breaker for solar array input disconnect. Mounts on the side of the DC250 or DC175
  • CD15: 15 amp circuit breaker for small DC loads. Mounts on the side of the DC250 or DC175
  • CD20: 20 amp circuit breaker for small DC loads. Mounts on the side of the DC250 or DC175
Xantrex DC175 Electrical Specifications
Maximum DC load on circuit breakers 175 amps
Maximum DC system voltage 125 VDC
Maximum high fault current interruption at 65 VDC 25,000 amps
Maximum high fault current interruption at 125 VDC 10, 000 amps
Maximum stranded wire size #4/0 AWG
Xantrex DC175 General Specifications
Allowed temperature range -40° F to 104° F (-40° C to 40° C)
Enclosure type Type 1, indoor, powder coated steel with 2" knockouts on the top of the enclosure for two Xantrex C series charge controllers or for conduit connections to Xantrex inverters
Unit weight 14 lb (6.4 kg)
Shipping weight 16 lb (7.3 kg)
Unit dimensions (H x W x D) 21 x 10.5 x 5" (53 x 27 x 13 cm)
Shipping dimensions (H x W x D) 23 x 13 x 8" (58 x 33 x 20 cm)
Mounting Indoor, wall mount with breakers in a vertical position only
Warranty Two years
Part numbers DC175 - DC Disconnects
  GJ175 - Optional, additional breakers
  DCBB - Optional ground block
  CD15, CD20, CD60DC - Optional, additional circuit breakers (4 maximum slots)
Features & Options
Bonding Block Optional bonding block (DCBB) simplifies wiring and grounding of the system
  Accepts up to four 4/0, two #1/0, two #2, and four #4 cables
Breakers Standard 175 amp breaker - accepts #6 to 250 MCM cables
  Optional additional 15, 20, 60, 175, and 250 amp breakers available
Regulatory Approvals ETL Listed to UL508 and CSA 22.2 No. 14
Note: Specifications and pricing of the DC175 175A Breaker with Enclosure subject to change without notice. Illustrations and descriptions of the Xantrex DC175 do not claim to be complete or exhaustive.

Customers Who Bought the DC175 175A Breaker with Enclosure Also Purchased:

Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Xantrex
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter