Blue Sky Energy SC30 Summary
- Product Type
- Charge Controller
- Battery Voltage
- 12 Volts
- Charging Type
- PWM
- Output Current
- 30 Amps
- PV Open Circuit Voltage
- 30 Voc
- PV Input @ 12V
- 360 Watts
Blue Sky Energy Sun Charge 30 12V/30A Charge Controller
Sun Charge 30 12V/30A Charge Controller
Blue Sky Energy’s new Sun Charger 30 solar charge controller charges 12 volt batteries at up to 30 amps. The Sun Charger 30 uses precise PWM charge voltage control combined with a sophisticated 3-stage charge algorithm to optimally charge flooded, GEL or AGM lead-acid chemistry batteries. To periodically condition flooded batteries the Sun Charger 30 will also perform a manual or automatic Equalization charge.
The built in low power LED digital display combines excellent readability with very low power consumption, includes an automatic night time diming feature and may be turned off completely if desired. The high accuracy display shows battery voltage, solar charge current, and computes total solar charge amp-hours produced. To provide optimal charge control for various battery types all charge settings are user adjustable. The automatic or manual Equalization and solar charge amp-hour counter features are unique to the Sun Charger 30.
The Sun Charger 30 will promote longer battery life by fully and properly charging batteries. Blue Sky Energy is a leading manufacture of solar panel charge controllers since 1998. We are recognized for producing reliable, quality products.
Features of the Blue Sky Energy Sun Charge 30 12V/30A Charge Controller
- Precise PWM charge voltage control 3-Stage charge control plus Equalization improves battery performance and life
- Low power LED digital display with auto night time dimming 12 Volt / 30 Amp rating supports a wide range of applications up to 450 watts of PV input
- Automatic night time disconnect
- Available battery temperature compensation
- Solar charge amp-hour counter
- Very low voltage drop
- Conformal coated electronics, anodized face plate and stainless steel fasteners resist corrosion
- Protection for reverse polarity, battery/PV swap, transient voltage, over current, over temperature
- Available special order with LVD, or LVD plus lighting control
- The Solar Boost Sun Charger 30 includes a 5 year warranty.
| Specifications | Sun Charger 30 |
| Output Current Rating | 30 Amp Maximum |
| Nominal Battery Voltage | 12 VDC |
| PV Input Voltage | 30 VDC Maximum (Recommended maximum PV Voc @ STC 24V) |
| Power Consumption | 14mA standby / 19mA display On |
| Charge Algorithm | 3-stage Bulk/Absorption/Float plus Automatic/Manual Equalization |
| Absorption Voltage/Float/EQ Voltage | 14.4VDC / 13.2V / 15.2V User Adjustable |
| Temperature Compensation | Optional temperature sensor adjusts charge voltage setpoints based on measured battery temperature, -5.00mV/°C/cell correction factor (Range - 0.00 - -8.00mV/°C/cell) sensor range -60 - +80°C |
| Display Range Accuracy | Battery voltmeters, 30.0VDC ±0.50% FS Output Ammeter, 35.0A ±0.50% FS Amp-hour counter 999AH ±0.50% ±2AH |
| Optional Lighting/Load Control | LVD, or LVD plus separate PostDusk & PreDawn timers. 50mA drive signal for external power switch. Available by special order. Contact BSE sales for further information. |
| Environmental | -40 to +40°C, 10 . 90% RH non-condensing |
| Warranty | 5 Year Limited Warranty |
| Panel Dimensions | 6 7/8" H x 6 5/8" W x 3 3/8" D (17.4cm x 16.8cm x 8.59cm) |
What our customers say about the Blue Sky Energy Sun Charge 30 12V/30A Charge Controller
So far... I love it. It was easy to wire, it's thin, 1.5",and it tells me the info I need ...
The Blue Sky controller I ordered was delivered in a timely fashion, works fine and cost less than a used ...
The product works better than expected, very pleased. The ordering process went very well. I recommend Infinigi to anyone interested. JB ...
