Blue Sky Energy Solar Boost 2000E Charge Controller

Blue Sky Energy Solar Boost 2000E Charge Controller

Solar Boost 2000E Charge Controller

Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 2000E to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.

The Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.

A built in LCD digital display monitors solar charge performance.The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.

Features of theBlue Sky Energy Solar Boost 2000E Charge Controller

Get Improved Performance From Your Solar Modules and Batteries
Patented MPPT technology increases charge current up to 30% or more!
12 Volt / 25 Amp rating supports wide range of applications
Multi-stage stage PWM charge control improves battery performance & life
Electronic current limit prevents overload or nuisance fuse blow
LCD digital display monitors PV charge performance
Durable powder coat finish & conformal coated electronics resist corrosion
Available temperature compensation further improves battery performance and life
Fully protected against excess current, temperature, transient voltage and polarity
Full 5 Year Limited Warranty

Charge Controller	Nominal Battery Voltage	Nominal PV Input Voltage*	Maximum PV Power**	Maximum Output Current	Charge Algorithm	Digital Display	Remote Display Capability	Load Control	Lighting Control	Agency Approvals	Typical Applications
Solar Boost 2000E	12V	12V	350W	25A	2-stage, plus Equalization	Yes	No	No	No	-	Small to medium 12V systems; RV's, boats, small off grid cabins & small industrial
Solar Boost 50L	12/24V	12/24V	700W (12V) 1400W (24V)	50A	3-stage, plus Equalization	Optional	Yes	No	No	ETL/cETL CE, FCC	Medium to large 12/24V systems; larger RV's & Boats, on or off grid homes & larger industrial
Solar Boost 3048L	24/48V	24/48V	800W (24V) 1600W (48V)	30A	3-stage, plus Equalization	Optional	Yes	No	No	ETL/cETL CE, FCC	Medium to large 24/48V systems; on or off grid homes, larger industrial & telecomm
Solar Boost 6024HL	12/24V	36/48V	800W (12V) 1600W (24V)	60A	3-stage, plus Equalization	Optional	Yes	No	No	ETL/cETL CE, FCC	Large 12/24V systems where higher 36/48V input is desired to reduce wire size/cost; large on or off grid homes & larger industrial
Solar Boost 3024iL	12/24V	12/24V	540W (12V) 800W (24V)	40A (12V) 30A (24V)	3-stage, plus Equalization	Optional	Yes	Yes 20A Voltage or AH based	Yes, Post-dusk & Pre-dawn timers	ETL/cETL CE, FCC	Medium 12/24V systems; larger RV's & Boats, on or off grid cabins & industrial. Aux. output for load control or 2nd battery charge. IPN™ network to coordinate multiple units for larger systems.
Solar Boost 2512i	12V	12V	350W	25A	3-stage	No	Yes	No	No	-	Small to medium 12V systems; RV's, Boats, small off grid cabins & small industrial. Includes limited IPN network interface to support IPN displays.
Solar Boost 2512iX	12V	12V	350W	25A	3-stage, plus Equalization	No	Yes	Yes 25A Voltage or AH based	Yes, Post-dusk & Pre-dawn timers	-	Small to medium 12V systems; RV's, Boats, small off grid cabins & industrial. Aux. output for load control or 2nd battery charge. IPN™ network to coordinate multiple units for larger systems
- Nominal PV module voltage must be greater than or equal to nominal battery voltage. PV VOC rating at STC should not exceed maximum controller rating ÷1.25. See Technical Bulletins 100214 & 100210. Typical 12V nominal PV module provides VMP≈17V & VOC≈21V at STC. * - Approximate maximum PV power handling capability after applying NEC 1.25 current derating. See Technical Bulletins 100214

Options & Accessories	Compatible Charge Controller	Agency Approvals	Typical Applications and Features
SB50 Display	SB50L 3048L, 6024HL	ETL/cETL CE, FCC	Available installed in product enclosure (append 'D' to p/n) and/or as a remote charge control display. Provides simple display of Input/Output current, Battery Voltage and Charge System Status.
IPN-ProRemote	SB3024i(L), 2512i(X) & future IPN based charge controllers	ETL/cETL CE, FCC	Full featured remote display combines both charge controller monitoring/setup and complete battery system monitoring. Includes highly accurate "fuel gauge" type battery capacity display. The IPN-ProRemote can monitor up to 8 IPN based charge controllers.
IPN-Remote	SB3024i(L), 2512i(X) & future IPN based charge controllers	ETL/cETL CE, FCC	Low cost remote display provides a simple Battery Voltage and Solar Charge Current display for IPN base charge controllers. The IPN-Remote can monitor up to 8 charge controllers on the IPN network.
DUO-Option	SB3024i(L)	ETL/cETL CE, FCC	Converts 20 amp auxiliary output into separate diversion type charge controller. Provides both diversion control for wind//hydroelectric and PV MPPT in the same unit. Configurable for minimum or maximum possible power to the dump load. Available as factory option or field upgrade.
CBM4070	SB3024i(L), 2512iX	CE	External high current MOSFET switch Current Booster Module. Increases DC load current capability of SB3024i(L) and 2512iX to 70 amps for lighting or similar DC load applications. Increases SB3024i(L) DUO-Option diversion PWM current capability to 40 amps.
Battery Temperature Sensor	All Solar Boost charge controllers	ETL/cETL CE, FCC	Allows charge controller to automatically adjust charge voltage setpoints based on measured battery temperature.

Specifications	Solar Boost 2000E
Output Current Rating	25 Amp Maximum (Output current limit 25.0±0.5A)
Nominal System Voltage	12 VDC
PV Open Circuit Voltage	30 VDC Maximum
Standby Power Consumption	17mA Typical
Charge On Power Consumption	70mA Typical
Charge Algorithm	Fully automatic two stage charge, Bulk & Constant Voltage. A third manually actuated Equalize charge function is included to periodically condition lead-acid batteries.
Charge Voltage Setpoint Range	13-16VDC (14.0VDC initial factory setting)
Equalization Voltage	Charge voltage setting +1.2VDC
Temperature Compensation	Optional temperature sensor adjusts charge voltage setpoint based on measured battery temperature. Field selectable slope, -5.0mV/°C/cell (lead-acid), or -2.0mV/°C/cell (NiCd)
Power Conversion Efficiency	95% @ 15 Amp Output
Panel Dimensions	4 5/8"H x 6 3/8"W x 1 7/8"D (11.75cm x 16.19cm x 4.76cm)
Construction	Open frame construction with conformal coated electronics visible from rear. Designed to mount into a rectangular surface cutout. Optional conduit ready surface mount box available.
Front Panel Displays	LCD digital display shows PV module input current, output charge current and battery voltage. Charge status LED shows present charge mode and battery state of charge.
Digital Display Range/Accuracy	Voltmeter, 19.99VDC / ±0.10% F.S. Ammeter, ±26.0A / ±0.75% F.S..
Specified Temperature Range	0 to +40°C (Extended range -40 to +50°C, will operate but may not meet spec.)

Recommended Products for the Blue Sky Energy Solar Boost 2000E Charge Controller

Blue Sky Energy SB2000E Wall Mount Box

$29.73

Note: Specifications and pricing of the Blue Sky Energy Solar Boost 2000E Charge Controller subject to change without notice. Illustrations and descriptions of the Blue Sky Energy SB2000E do not claim to be complete or exhaustive.