Analytic Systems BCA610-110-24 Battery Charger 24VDC

The Analytic Systems BCA610-110-24 Battery Charger 24VDC is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff

Analytic Systems BCA610-110-24 Battery Charger 24VDC

BCA610-110-24 Battery Charger 24VDC

The BCA610 battery charger provides up to 600 watts to charge a 12, 24, 32, or 48 Volt battery system (1, 2 or Optional 3 banks) from a 110 or 220VAC source. The batteries must share a common ground.

This all-new single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quite operation. Multiple stages of filtering reduce radiated or conducted noise to very low levels. Extra features include adjustable output voltage, audible and visual indicators for low input voltage, low output voltage, over temperature and an equalize charging cycle. Safety features include both charger and battery over-temperature shutdown, current limiting, short circuit protection with automatic recovery, input undervoltage shutdown, reverse battery hook-up protection, a dry contact alarm relay output and output overvoltage crowbar.

Optional features include a Digital Volt/Ammeter, 3-Bank Charging, a Remote Control Panel, and/or a second Battery Temperature Sensor. We are confident that you will get many years of reliable service from this AC Battery Charger.

Features of the Analytic Systems BCA610-110-24 Battery Charger 24VDC:

  • Adjustable output voltage for charging standard or deep cycle lead-acid, VRLA or Gel cell type battery
  • Extremely rugged and well suited for marine and other demanding environments
  • High tolerance for shock and vibration
  • Ultra-quiet low EMI operation
  • Can be left permanently connected
  • Can function as a power supply
  • User selectable 2 or 3 stage charging profile
  • Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
  • Over-temperature shutdown
  • Temperature compensated charging
  • Short circuit protection
  • Output over-voltage crowbar
  • Inrush Current Limiting with solid state bypass
  • Dry contact output fail relay
  • 3 year parts and labour warranty


  • Marine & other rugged environments
  • Automotive / RV
  • Electric Utilities and Substations
  • Base Station Power(Radio & Telecommunications)
  • OEM Applications
  • Field Work / Construction Sites
  • Solar Power Systems
  • Emergency Power Backup (UPS)
  • Security Systems
  • Charge any 12, 24, 32, or 48 Volt Battery System

Also Known As:
BCA610 110 24

Electrical [Input]
Nominal Vac (ip) 110 220
Actual (Vac) 105-125 210-250
Input Amps (Max) 8 4
Input Circuit Breaker 10A 3A
Input Frequency 45-65 Hz
Noise on Input <50mV

Environmental Specification
Operating Temp. Range -25° to +40°C @ maximum output
Derate Linearly 2.5% per °C from 40°C
(Optional -40°C extra wide temp. operation avail.)
Humidity 0 - 95°C Relative Humidity
(non-condensing) with optional conformal coating
Audible Noise NONE - 0db @ 3 ft
Typical Service Life >10 years (87,600 hours)
Isolation Input-Case & input-output 1500VDC
Output - Case 500VDC(1500VDC @ 48V O/P)

Mechanical Specification
Length 14.5 in/ 36.8 cm
Width 9.9 in/ 25.1 cm
Height 3.0 in/7.6 cm
Clearance 1 inch (2.5 cm) all around
Material Marine Grade Aluminium
Finish Black Anodize / Powder Epoxy Coat
Fastenings All 18-8 Stainless Steel
Weight 7.2 lb / 3.3 kg
Warranty 3 years
Safety Built to meet UL458 & CSA22.2.107.1


Electrical [Output]
Output Nominal (op) 12 24 32 48
Output Volts (DC) 13.6 ± 0.05 27.2 ± 0.05 36.3 ± 0.05 54.4 ± 0.05
Absorption Voltage (Vdc) 14.4 28.8 38.4 57.6
Charging Amps 40 22 16.5 11
Absorption to Float(15%) 6.0 Amps 3.3 Amps 2.48 Amps 1.65 Amps
Output Adjustment(Vdc) ± 1.0V
Output Fuses(AGC) 40Amp x1 30Amp x1 20Amp x1 15Amp x1
Battery Banks 1,2 or (3 Bank Option Available)
Battery Size( Amp Hrs.) 160-240 88-132 66-99 44-66
Output Crowbar 16.0 ± 0.5V 32.0 ± 1.0V 42.7 ± 1.3V 63.9 ± 2.0V
Output Ripple & Noise < 50 mV
Regulation (Line & Load) < +/- 0.5%
Temperature Comp. -30 mV/°C -60 mV/°C -80 mV/°C -120 mV/°C
Duty Cycle Continuous 100% for 24 hours per day
Efficiency > 75% @ Maximum Output
Stages 2 or 3 (user selectable)
Note: Specifications and pricing of the Analytic Systems BCA610-110-24 Battery Charger 24VDC subject to change without notice. Illustrations and descriptions of the Analytic Systems BCA610-110-24 do not claim to be complete or exhaustive.
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Analytic Systems
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter