Xantrex TR-REMOTE - Trace Series Remote ON/OFF Switch
The TR-REMOTE ON/OFF SWITCH (TR-REMOTE) duplicates the ON/STANDBY switch on the Trace Series™ Inverter/Charger and displays general system operating parameters. The TR-REMOTE ships with a 50 ft (15 m) length of special 6-conductor cable which connects directly to the Trace Series Inverter/Charger's COM port.
The TR-REMOTE includes the following features.
- Easy-to-Read Indicator Light
- Front Panel Control
- Plug-in Installation
The following system operating parameters are displayed with a single indicator light.
- Inverter Status (ON/OFF)
- Fault or Warning Indicator
Operation When the TR-REMOTE is used with the Trace Series Inverter/Charger the red indicator light will display the following:
Normal operation. If qualified AC line is present, unit is in charge/standby mode and passing AC through to the loads. If qualified AC line is not present, unit is in invert mode.
- Slow Flashing:
Active Warning is present.
- Fast Flashing:
Active Fault is present.
The unit is off.
The TR-REMOTE must be connected before turning the inverter ON from the ON/STANDBY button. If the unit is not responding to the TR-REMOTE, switch the unit OFF and then ON using the ON/STANDBY button.
Also Known As: