Xantrex SW4548E
Xantrex SW4548E, 4500VA-48VDC Input, Sine Wave Inverter

SW4548E, 4500VA-48VDC Input, 230VAC 50Hz Out, Sine Wave Inverter/Charger

Xantrex SW4548E Grid Tie Inverter/Charger

Description

The SW Inverter/Charger is our most popular off-grid power solution. Available in 24- and 48-volt models, it provides utility-grade output power and offers high surge capacity to run most household appliances. The SW offers many programmable features including automatic generator start and stop, and automatic load sensing. Its built-in, fully automatic, three-stage battery charger is designed to bring maximum charge to batteries, while using minimum generator run time and fuel.

Features

• Available in 3000 and 4500 watt models
• Utility grade, sine wave power
• Durable construction for long life under extreme environmental conditions
• Three-stage battery charging (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance
• Programmable control module with LCD display and LED indicators
• Low idle current (less than 1 watt) conserves energy when no loads are present
• Soft start capability for starting heavy loads
• Built-in starting control circuits for two- and three-wire generator starting systems

Expandable and Flexible

• Parallel stacking capability for more power at the same voltage (optional equipment is required)
• Three phase configurations available in a Power Module System for industrial quality power in remote locations (optional equipment is required; only available on 48-volt models).

Electrical Specifications
AC input voltage	230 VAC
AC input voltage range	150-288 VAC
AC input current	30 amps AC pass through 15 amps AC charging
Continuous Power @ 25°C	4500 VA
Efficiency (Peak)	96 %
Output voltage (RMS)	230 VAC
Output voltage Regulation	+/- 5%
Waveform	Sine wave, 34 to 52 steps per cycle
Frequency(Nominal +/- 0.04% crystal controlled)	50 Hz
Continuous output @ 25°C	19 amps AC
Total Harmonic Distortion	< 5%
Automatic transfer relay	30 amps AC pass through 15 amps AC charging
DC input voltage (Nominal)	48 VDC
DC input voltage range	44-66 VDC
DC current at rated power	120 amps DC
Short circuit current	180 amps DC
Idle consumption	< 20 watts
Search mode consumption	< 1 watt
Low battery protection (Enabled)	Adjustable low battery cut out
Max. charge rate (adjustable)	60 amps DC
Load Sensing (Inverter Mode)	Adjustable, 0 to over 200 watts (48 watts default)
General Specifications
Specified temperature range	32°F - 77°F (0°C - 25°C)
Enclosure type	Indoor, ventilated, steel chassis with powdercoat finish
Unit weight	105 lb (48 kg)
Shipping	111 lb (50 kg)
Inverter dimensions (H x W x D)	15 x 22.5 x 9" (38 x 57 x 23 cm)
Shipping dimensions (H x W x D)	20 x 27 x 15" (52 x 69 x 40 cm)
Mounting	Wall mount
Warranty	Two years
Part Numbers	SW4024W
Features & Options
Forced air cooling	Standard variable speed brushless DC fans
Three-stage charging	Standard three-stage (bulk, absorption, and float)
Control panel	Standard built-in, two line, backlit, alphanumeric LCD with 8 LED status indicators
Auto Generator Control System	Standard automatic generator control system for two and three wire start generators
Auxiliary Relays	Standard three user adjustable voltage controlled signal relays for control of loads or charing sources
Battery Temperature Sensor	BTS - standard remote battery temperature sensor for increased battery performance
Remote Control	SWRC - optional remote control and status indicator
Conduit Box	SWCB - optional side mount conduit box for code-compliant DC wiring connections
Regulatory Approvals	CE Mark

Important Note for the Xantrex SW4548E, 4500VA-48VDC Input, Sine Wave Inverter

Shipping Note: Due to the delicate/oversized nature of this product, our online shipping system is not able to accurately determine the cost for shipping. You may proceed with an online order and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.