Xantrex SW4024MC2
Xantrex SW4024MC2 Sine Wave Inverter

Xantrex SW4024MC2, 4000VA-24VDCInput, 120VAC 60Hz Out, Sine Wave Inverter

Xantrex
SW 4024MC2 Sine Wave Inverter

Advanced Sine Wave Power - 120 VAC/60 Hz Models
Widely used throughout the world as a primary source of AC electricity, the SW offers sine wave, utility grade output power, high capacity battery charger, high surge current ability (inrush current), and easy installation.

Heavy Duty True Sine Wave Inverter/Chargers

Product Features

• 120 VAC output at 2500 watts (12 V model) or 4000 watts (24 V model)
• Three-stage battery charging (bulk, absorption, and float) with remote temperature sensor for increased charge accuracy
• Dual AC source inputs - shorepower and generator
• Programmable control module with LCD and LED indicators
• Low idle current (less than 16 watts) conserves energy when no loads are present
• Soft start capability for starting heavy loads
• Built in starting control circuits for two and three wire generators
• Integral relays can be programmed to start and stop auxiliary loads
• Two year warranty

Options

• Series stacking capability for 120/240 VAC operation
• Parallel stacking capability for greater output at the same voltage
• Remote panel and status indicator (SWRC)

Electrical Specifications
AC input voltage	120 VAC
AC input voltage range	80 - 149 VAC
AC input current	60 amps AC pass thru 30 amps AC charging (Required for full pass through and full charging)
Continuous Power @ 25°C	4000 VA
Efficiency (Peak)	94%
AC output voltage (RMS)	120 VAC
AC output voltage regulation	+/- 5%
Frequency	60 Hz
Waveform	Sine wave, 34 - 52 steps per cycle
Total harmonic distortion	< 5%
Continuous output @ 25°C	33 amps AC
Surge capability:
5 sec rating (resistive)	8000 watts
1 mSec	110 amps AC
100 mSec	78 amps AC
Automatic transfer relay	60 amps
DC input voltage (Nominal)	24 VDC
DC input voltage range	22 - 33 VDC
DC current at rated power	200 amps DC
Idle consumption	< 16 watts Typical at Full Voltage
Search mode consumption	< 1 watt
Max. charge rate (adjustable)	120 amps DC at 24 V nom.
General Specifications
Specified temperature range	32°F - 77°F (0°C - 25°C) Power derated about 25°C
Enclosure type	Indoor, ventilated, steel chassis with powdercoat finish
Unit weight	105 lb (48 kg)
Shipping	111 lb (50 kg)
Inverter dimensions (H x W x D)	15 x 22.5 x 9" (38 x 57 x 23 cm)
Shipping dimensions (H x W x D)	15 x 27 x 21" (38 x 69 x 53 cm)
Mounting	Bulkhead mount
Warranty	Two years
Part numbers	SW2512MC
	SW4024MC2
	SWRC (SW remote control panel with LCD and 25' cable for SW4024MC2 and SW2512MC)
	SWRC/50FT (same as above but with 50' cable)
Regulatory Approvals	ETL approved under standard UL458

Important Note for the Xantrex SW4024MC2 Sine Wave Inverter

Shipping Note: Due to the delicate/oversized nature of this product, our online shipping system is not able to accurately determine the cost for shipping. You may proceed with an online order and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.