Xantrex PROsine-2-12V-GFCI
Xantrex PROsine 2.0 12V Sine Wave Inverter/Chrg GFCI

PROsine 2.0 12V, 2000W with GFCI outlet, temp sensor & LCD remote Xantrex

Xantrex
Prosine 2.0 - 2000 Watt True Sine Wave Inverter/Chargers

Provides 2000 watts of true sine wave AC power from a DC source and 100-amp multistage battery charging

A powerful all-in-one solution, Prosine 2.0 inverter/chargers deliver up to 2000 watts of unsurpassed clean true sine wave output power and combines this with a 100 amp, multistage battery charger. Series stackability allows for two units to power 240 VAC applications such as power tools, over ranges, washer/dryer combinations and air conditioner. The system includes a full function LCD remote control panel and battery temperature sensor.

Product Features
• 2000-watt inverter (4500-watt surge)
• 100 A power factor corrected multistage charger
• True sine wave output (crystal controlled)
• Built-in 30 A transfer switch automatically transfers between inverter power and incoming AC power
• Series stackability for 120/240 VAC (requires two units)
• Power sharing reduces charging current when AC loads are activated to prevent tripping of shorepower breaker
• Equalization mode conditions batteries for longer life
• Optional GFCI version available
• LCD remote control panel and temperature sensor included
• Compact, lightweight, and easy to install
• Two year warranty

Remote Control Panel

• Independent inverter and charger on/off controls • Push button control of power sharing, equalizing, battery set-up, and system configuration • Easy to read backlit digital text messaging display • Numerically displays AC and DC system information including volts, amps and state of inverter/charger • Monitors battery temperature and adjusts charger to provide an accurate charge in any climate

Protection Features
• Over voltage and under voltage protection
• Over temperature and automatic overload protection
• Short circuit AC backfeed protection

Options
• DC wiring box

Electrical Specifications - Inverter

Output power continuous	2000 watts
Surge rating (5 sec.)	4.5 kW
Output current	17 A RMS continuous, 50 A peak
Output voltage	117 VAC RMS
Output frequency	60 Hz +/-0.05% (crystal controlled)
Output waveform	True sine wave<2% THD typical
Efficiency (full load)	87%
Peak efficiency	89%
No load power draw (inverting)	<25 W
No load power draw (search mode, 3 s interval)	<2 W
Input DC voltage range	10 - 16 VDC

Electrical Specifications - Charger

Output current	100 A DC continuous
Output voltage	12 VDC nominal
Output voltage range	0 - 17.5 V
Charge control	3 stage with manual equalize
Charge temperature compensation	Remote battery sensor
Efficiency	81% typical
AC input power factor	0.99
Input current (for 100 A charging)	15 A RMS nominal
Input AC voltage	120 VAC nominal
Input AC voltage range	90 - 135 VAC

Note: Specifications subject to change without notice.

Also Known As:

PROsine.2.12V.GFCI
PROsine 2 12V GFCI
PROsine_2_12V_GFCI
PROsine212VGFCI