Xantrex DCCB-L-175 Long DC Conduit Box with a GJ175F for SW PlusXantrex DCCB-L-175 Long DC Conduit Box with a GJ175F for SW Plus
Xantrex DCCB-L-175 Long DC Conduit Box
The Xantrex Sine Wave Plus Long DC Conduit Box (DCCB-L) connects to the DC side of the inverter and accepts DC conduit runs. The conduit box provides protection to the DC cables connected to the inverter and provides a centralized location for the DC circuit breakers and PV Ground Fault Protection (GFP) breakers. It is also designed to incorporate cabling from up to two Multi-function DC Charge Controllers, such as the Xantrex C-Series Charge Controllers, and cabling from a battery meter, such as the Xantrex Battery Status Meter.
The Long DC Conduit Box is available in three different configurations.
• The Xantrex DCCB-L Basic provides an internal ground bar only and space to add additional circuit breakers; three large and six small.
• The Xantrex DCCB-L-175 includes a 175 amp GJ, F-Type, circuit breaker, a DC negative bus bar and 500A/50 mV shunt, battery cables (1 set) and a ground wire connected to the ground bar.
• The Xantrex DCCB-L-250 includes a 250 amp GJ, F-type, circuit breaker a DC negative bus bar and 500A/50 mV shunt, battery cables (1 set) and a ground wire connected to the ground bar.
For expandability, the Long DC Conduit Box is designed so that a second DCCBL (any model) can be added on for additional breaker spaces, wiring, room and controller mounting spaces.
Also Known As:
DCCB L 175