C60 Charge Controller, 60A, 12/24V
C Series- Small System Charge or Lighting or Load Controller
» The C Series offers three models, the C35, C40, and C60, that can handle 35,40, and 60 amps of DC current.
» Silent, pulse width modulated (PWM), high efficiency operation.
» Three-stage battery charging (bulk, absorption, and float).
» Automatic overload protection in both active and passive modes.
» PV array short circuit and reverse polarity protection.
» Durable construction.
» Backed by a two year warranty.
» Microprocessor controlled.
As a Solar Charge Controller
» When used as a solar charge controller, the C35 and C60 can control 12 or 24 array operation and the C40 can control 12, 24 or 48 VDC array operation.
» All units offer selectable settings for NiCad, flooded lead acid, gel, or absorbed glass mat batteries.
As a DC Load Controller
» As a DC load controller, the C Series has a low voltage disconnect warning system and field adjustable set points that govern automatic low and high voltage disconnect.
» Manual reset switch for emergency low voltage operation.
As a Diversion Load Controller
» The C Series automatically directs extra power to a dedicated load such as an electric water heater and ensures batteries are never over-charged.
» Plug-in remote temperature sensor (BTS) for increased charging precision.
» Cumulative amp-hour meter (CM) that can be installed on the face of the controller, or remotely (CM/R), up to 100 feet (30 m) away.
| Voltage Configurations|| 12 and 24 VDC|
| Max. PV Open Circuit Array Voltage|| 55 VDC|
| Charging / Load Current (at 25 °C)|| 60 amps DC|
| Max. Peak current|| 85 amps|
| Max. Voltage Drop through Controller|| 0.30 volts|
| Typical Operating Consumption|| 15 ma|
| Typical Idle Consumption|| 3 ma|
| Recommended Breaker Size|| 60 amps rated at 1000% continuous duty|
| Recommended Wire Size|| #6 AWG rated at 90 °C|
| Lead AcidBatterySettings|| Adjustable|
| NiCadBatterySettings|| Adjustable|
| Load Control Mode|| Low Voltage Reconnect - Adjustable (sticker provided with unit) all models|
| || Low Voltage Disconnect - User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selectable grace period) all models|
|General Specifications for the Xantrex C60|
| SpecifiedTemperatureRange|| 32° F to 104° F (0° C to 40° C)|
| Enclosure Type|| Indoor, ventilated, powder coated steel with 3/4" and 1" knockouts|
| Unit Weight|| |
| Shipping Weight|| |
| Dimensions (H x W x D)|| |
| Shipping Dimensions (H x W x D)|| |
| Mounting|| Vertical wall mount - indoor only|
| Altitude - Operating|| 15,000' (4,572 m)|
| Altitude - Non-Operating|| 50,000' (15,240 m)|
| Warranty|| Two years|
| Part Numbers|| C5, C40, C60 - Controllers|
| || CM - Front Display Panel|
| || CM/R-50, CM/R-100 - Remote Display Panel|
| || BTS -Batterytemperature sensor|
|Features & Options|
| Regulation Method|| Solid stage, three-stage (bulk, absorption, and float), pulse width modulation|
| Field Adjustable Control Setpoints|| Two user adjustable voltage setpoints for control of loads or charging sources - setting retained if battery is disconnected|
| Display Panel|| CM, CM/R-50, or CM/R-100 - optional LCD - backlit, alphanumeric display showing battery voltage, DC amperage, cumulative amp hours, and amp hours since last reset - remote includes 50' (15 m) or 100' (30.5 m) cable|
| Equalization Charge|| User selectable manual or automatic equalization - every 30 days|
| BatteryTemperature Sensor|| BTS - optional remote battery temperature sensor for increased charging precision|
| Regulatory Approvals|| UL Listed to UL 1741 - 1999 and to CSA 22.2 No. 107.1-95 Standards, CE compliant|