UNI-SOLAR ePVL-68
Unisolar ePVL-68 Power Bond 68W Flexible Solar PV Roofing Laminate

ePVL-68 Power Bond 68W Flexible Solar PV Roofing Laminate

Unisolar ePVL-68 Power Bond 68W Flexible Solar PV Roofing Laminate

Building on 25 years of solar experience, the new, enhanced version of our proven PVL delivers greater
efficiency, packing density and ease of installation, resulting in a lower cost of electricity than ever before.

Key Attributes

• Lightweight and flexible
• Roof-friendly solution requiring no penetrations
• BIPV & BAPV
• Superior performance at high temperatures
• Excellent performance even when partially shaded
• Built-in strain relief reduces installation labor and improves reliability
• Lead-free RoHS compliant design

Application Criteria

• Suitable for installation on clean, dry approved substrates (refer to uni-solar.com for full details) at ambient temperatures above 10°C

Roof Requirements

• Maximum slope of 60°
• Install in areas free of water pooling

Performance Characteristics

• Rated Power (Pmax): 68 Wp
• Tolerance of Pmax: ±5 %

Mechanical Characteristics

• Junction Box: IP66 terminal housing with integrated strain relief
• Connectors: Polarized, weatherproof latching connectors with 4 mm2 (12 AWG) halogen-free cables
• Bypass Diodes: Connected across every solar cell
• Front Surface: Durable ETFE high light-transmissive polymer
• Adhesive: Peel and stick pressure sensitive adhesive (PSA)
• Cell Type: Multi-junction amorphous silicon solar cells 356 mm x 239 mm (14" x 9.4")

Certifictions and Warranty

• UL 1703 Listed by Underwriters Laboratories® for electrical and fire safety (Class A Max. Slope 2/12,
  Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC
• IEC 61646 and IEC 61730 certified by TÜV Rheinland for use in Class A PV systems up to 1000 VDC
• MCS Certified
• CEC Listed
• 5-Year Limited Product Warranty
• Limited Power Output Warranty: 92% at 10 years, 84% at 20 years, 80% at 25 years (of minimum power)

Also Known As:
ePVL.68
ePVL 68
ePVL_68
ePVL68

Specifications for the Unisolar ePVL-68 Power Bond 68W Flexible Solar PV Roofing Laminate

Notes:
1. During the first 8-10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operating voltage may be higher by 8%, and operating current may be higher by 7%, Voc may be higher by 4% and Isc may be higher by 2%.
2. Production tolerance for Pmax at standard test conditions (STC) is +/-5% and for other electrical parameters is +/-10%. Electrical specifications are based on measurements performed at STC of 1000 W/m2, AM1.5 and cell temperature of 25°C (per AS™ E892) after long-term stabilization. Actual performance may vary up to 10% from rated power due to low temperature operation, spectral and other related effects. Maximum system open-circuit voltage not to exceed 600 VDC per UL, 1000 VDC per IEC regulations.
3. Specifications subject to change without notice.