Xantrex Truecharge 10TB Battery Charger
Xantrex Truecharge 10TB Battery Charger
High Performance, Multistage Charging
Truecharge multistage battery chargers are microprocessor controlledfor fast and accurate charging of all deep-cycle 'house' batteries. Awide AC input voltage range enables proper delivery of a fullthree-stage charge, even when charging from less than perfect qualityshorepower or generator power. Smart features, such as adjustabletemperature compensation and independent settings prevent batterydamage due to overcharging and also help extend the life of expensivebatteries. All Truecharge battery chargers come with a one yearwarranty.
Truecharge 10/10TB
- 10 amp DC output
- Microprocessor controlled, multistage charging
- Charges up to two battery banks simultaneously (Truecharge 10TB)
- Covered terminal block with screw terminals for safe and easy connection (Truecharge 10TB)
- Easy battery connection with clip leads (Truecharge 10)
- Three settings for temperature compensation (Truecharge 10)
- Settings for flooded or gel lead-acid batteries
- Wide voltage range operation (90-135 VAC, 50/60 Hz)
- Automatic 21-day top-up program
Protection Features
- Over-temperature shutdown and overload protection
- Ignition protected for installation in gas engine compartments (10TB, 20+ and 40+)
- Transformer isolated for safety and to protect against electrolysis
- Reverse polarity protection
- Short-circuit and surge protection
| Electrical Specifications for the Truecharge 10TB |
| Output current | 10 A @ 14.5 V nominal |
| Output voltage (nominal) | |
| Charge | 14.2 - 14.4 VDC |
| Float | 13.5 - 13.8 VDC |
| DC output connections | dual |
| Output fuses | 15 A 32 V |
| AC input voltage | 90-135 VAC, 50/60 Hz |
| Temperature compensation | none |
| Charger efficiency | 85% approx. |
| Recommended battery type | gel / flooded |
| General Specifications for the Truecharge 10TB |
| Operating temperature | 32° F to 104° F (0° C to 40° C) |
| Storage temperature | -13° F to 158° F (-25° C to 70° C) |
| Battery connection | two separate positive terminals, one common negative terminal |
| AC and DC connections | six position terminal block with No. 8 screws (for ring terminals with maximum 0.42 OD) |
| Dimensions (H x W x D) | 2.75 x 6.5 x 10.65" (70 x 165 x 270 mm) |
| Weight | 3.0 lb (1.4 kg) |
| Warranty | One year |
| Part number | 804-0111 |
| Regulatory Approvals for the Truecharge 10TB |
| | CSA/NRTL approved to CSA 107.2, UL 1236, including ignition protection and the Marine Supplement |