SunPumps 85178
SunPumps 85178 SCS 17-200 1.5HP Submersible Pump

85178 SCS 17-200 1.5HP Submersible Pump

SunPumps 85178 SCS 17-200 1.5HP Submersible Pump

SCS series submersibles are high quality, maintenance-free, DC powered pumps specifically made They operate on 140 to 2000 watts of DC power at 30 to 180 volts. The power may be supplied from a variety of independent sources including solar modules, wind generators, batteries or any combination of the three.

The submersible motors incorporate the latest in high efficiency, permanent magnet, brushless DC technology. They are constructed of corrosion resistant, marine grade bronze and stainless steel. Supplied with an industry standard NEMA connection, they bolt directly to standard 4” submersible pump ends. Internal pressure equalization allows motor submergence to any depth without damage to seals. The pump ends are multi-stage centrifugals constructed of stainless steel, or marine grade bronze and stainless steel on select models. The impellers are wear resistant glass filled, engineered composite and are resistant to mineral and algae deposits. The bowls are constructed of stainless steel for strength and abrasive resistance.

Features of the SunPumps 85178 SCS 17-200 1.5HP Submersible Pump:

• SunPumps SCS 17-200 is a 1.5 HP brushless DC submersible pump.
• High-power submersibles, intended for pumping higher water volumes from greater depths.
• Designed specifically for water delivery in remote locations.
• SCS series pumps can be installed below the water level in a water well, lake, river, or cistern.
• Can be used to fill an open tank or in a pressurized system.
• Operates on 140 to 2000 watts of DC power at 30 to 180 volts from any combintion of DC power sources.
• Multi-stage centrifugal, DC powered, submersibles constructed of corrosion resistant marine grade bronze and stainless steel.
• The submersible motors incorporate the latest in high efficiency, permanent magnet, brushless DC technology.
• Supplied with an industry standard NEMA connection, they bolt directly to standard 4” submersible pump ends.
• The pump can be operated at five different nominal voltages. Each voltage has a optimal head and flow rate design point. They are as follows:
  • At 180 volts DC the peak efficiency point is 17 GPM at 200 feet of head.
  • At 150 volts DC the peak efficieny point is 12 GPM at 180 feet of head.
  • At 120 volts DC the peak efficiency point is 10 GPM at 125 feet of head.
• Shipping Weight 36 lbs
• Part #85178

Specifications for the SunPumps 85178 SCS 17-200 1.5HP Submersible Pump