Whisper H-80 Marine Wind Generator & Multi Voltage Controller
Whisper H-80 Marine Wind Turbine
The new Whisper H40 and H80 Marine models are especially suited for applications near or on the ocean where the corrosive wet and salty environment prevent the use of traditional wind turbines. By coating key components and replacing traditional seals and wires with marine grade materials, the Whisper Marine is a reliable source of power in the harshest locations.
To get the most out of low to moderate wind speeds (up to 12 mph), the Whisper H80 is the turbine of choice. Featuring a ten-foot (3 m) rotor diameter, the H80 will deliver twice the power in marginal wind areas than the H40. In a 12 mph average wind (5.4 m/s), expect 200 KW/h per month to your batteries.
A high voltage model is available for long wire runs up to 2 miles, and an AC direct drive Water Pumping model connects directly to an electric water pump without the need for batteries.
The bigger brother to the H40, the Whisper H80 features a 10 ft (3.1m) rotor diameter and an 80 sq. ft. swept area that provides the user with greater output at low wind speed averages. The H80 has twice the swept blade area, providing double the potential energy as compared to the H40. The H80 also incorporates a permanent magnet alternator powered with an advanced airfoil, thus capturing the most energy in its class as compared to other competitive wind turbines. At 12 mph average wind speed, the H80 can deliver 6.3 KWH per day.
Patented Angle Governor: Exclusive to the Whisper, the side furling Angle Governor protects the turbine in high winds by turning the alternator and blades out of the wind, reducing its exposure. Unlike other wind turbines that lose as much as 80% of their output when furled, the Angle Governor allows the Whisper to achieve maximum output in any wind.
Marine Additional Features
» Proprietary aerospace coating is applied to castings, rotor can and tower inserts for superior protection. This coating withstood over 6000 hours of salt spray in a test performed by an independent laboratory
» Stator is protected with a top-quality MIL-1 naval approved varnish
» Brush card gasket seals slip rings from moisture
» Corrosion resistant electro less nickel-plating on shaft and spindle
» Stainless steel hardware throughout
» Anodized & tin plated EZ-Wire
» Permanent magnet brushless alternator
» CE Compliant
» Cast aluminum housing
» 2 year warranty
» Three blade design
» Blade material: Injection-molded fiber reinforced
|Rotor diameter:||10' (3.0 meters)|
|Weight:||65 lbs (30 kg)|
|Mount:||2.5" Schedule 40|
|Start-Up Wind Speed:||7.0 mph (3.1 m/s)|
|Voltage:||12, 24, 36, 48 VDC|
230V High VAC
|Peak Power:||1000 Watts @ 24 mph (10.5 m/s)|
Also Known As:
W H80 M MVC