Solar-Log 255189 Wifi Inverter Monitoring All Brands - 1-10 Inverter
Solar-Log 500 Wifi Inverter Monitoring All Brands - 1-10 Inverter
Solar-Log is a cost-effective, monitoring system that supports over 40 inverter brands for monitoring any size installation, from residential to large-scale commercial systems. The award-winning Solar-Log "Easy Installation" function makes this one of the fastest and easiest monitoring systems to install. Solar-Log units connect to a local area network or Internet router throu Ethernet or WiFi. They have an RS-422/RS-485 input for wired connection to the inverter(s) of the system being monitored. The Solar-Log200 supports a single inverter and is configured via built-in web server. The easy installation mode coupled with Solar-Log WEB Commercial edition allows you to connect the logger, check the status lights, then finish configuration remotely over the internet.
Features of the Solar-Log 500 Wifi Inverter Monitoring All Brands - 1-10 Inverter
Easy to Install
Thanks to its special housing the Solar-Log500 can also be installed perfectly in living areas. The cable routing is covered by the generous housing. It can be operated via the keypad with its two-line text display or via the PC connected to it. As for all Solar-Logs, the Solar-Log500 is also multi-vendor capable and compatible with all popular inverters
Comprehensive performance Comparison
The Solar-Log500 not only measures and compares the yield data of the individual strings, but also the performance data of the individual inverters. This allows errors and malfunctions that are for example due to obscured sunlight, rodent gnawing or inverter failure to be quickly and reliably analyzed.
Configurable Alarm Function
Alarms are sent out automatically via email or SMS as preferred. Daily yield notifications are also possible. Furthermore, all status and error messages can be conveniently called up from any web-enabled PC.
Every 15 seconds the Solar-Log500 checks the performance data of the plant and logs up to 200 events per inverter. In addition it also identifies derating conditions or network malfunctions being experienced by the power network operator.
Comparison of String and Inverters
The Solar-Log500 monitors up to ten inverters with a total output of up to 50 kWp. The monitoring function covers both the comparison of individual strings and the comparison of all connected inverters among each other. This allows malfunctions to be easily and securely diagnosed even for larger plants.
Graphic Data Preparation
Not only does the web-based software make installation easier, it also allows both tabular and clear graphic display of daily, monthly and annual yields - available at any time, anywhere in the world. Data can also be easily integrated into your personal homepage. Use Solar-Log™ WEB for optimum plant evaluation or ask your installer about the many advantages of the professional functions contained in Solar-Log WEB.
Solar-Log with WiFi
The Solar-Log 500 is available with WiFi. This applies for the standard Solar-Log as well as for the Bluetooth version. An internet cable connection is not required. Prerequisites are only a WiFi router. WiFi Repeater might be required on poor signals.
|Solar-Log 500 Specification|
|Wifi (wireless LAN)||+|
|Powermanagement (PM+) / GPRS||-|
|Powermanagement (PM+) / WiFi||+|
|Central inverter SCB and SMB||-|
|Max. no. of inverters||up to 10|
|Communication interface||1 x RS485 / RS422|
|Inverter mixed operation||several inverters per manufacturer|
|Recommended max. plant size||50 kWp|
|Max. cable length||max. 1000m|
|String monitoring (depending on type of inverter)||+|
|Status of power monitoring||+|
|Status of fault||+|
|Connection of sensors (temp./wind)||+|
|Connection to Sensor Basic||+|
|E-mail and SMS alarm||+|
|Local alarm (pot.-free contact)||-|
|Self-produced energy consumption: Digital electricity meter||+|
|Self-produced energy consumption: Control of ext. consumers||-|
|Integrated web servers||+|
|Graphic visualisation - PC local||+|
|Graphic visualisation - USB flash drive||-|
|Graphic visualisation - Internet||+|
|LED - status display||+|
|Display on device||2-line text display|
|Operation on device||keypad entry|
|Large display RS485/S0 impulse||+|
|S₀ in/out||+ / +|
|Modem, analogue / GPRS(GSM)||-|
|Potential-free contact (relay)||-|
|Alarm contact (anti-theft)||-|
|Network voltage / device voltage||115 V - 230 V / 12 V|
|Ambient temperature||-10°C to +50°C|
|Housing/dimensions (W x D x H) in cm||Plastic / 22,5 x 4 x 28,5|
|Protection level||IP 20 (only for interior use)|
|Connection to Solar-Log™ WEB||+|
|Multi-lingual (DE, EN, ES, FR, IT, NL,DA)||+|
|Memory, micro SD, 2 GB, Endless-loop data recording||+|
|Warranty cover age||5 years|