Solar Converters PPT 12-24-30 Linear Current Booster - Pump Driver - 30 Amp
[PPT 12-24-30, PPT.12-24-30, PPT-12-24-30, PPT_12-24-30, PPT12-24-30]
Solar Converters PPT 12-24-30 Linear Current Booster - Pump Driver - 30 Amp
PPT 12-24-30 Linear Current Booster / Pump Driver
Used to control and power a DC motor from a solar panel. The unit prevents stalling of the motor under less than full sun condition. The power of the sun is transformed to the motor running conditions so as the sun goes down the motor slows down instead of stalling. Conversely, or as the sun comes up the motor starts running much earlier instead of staying stalled for hours when it could be running. This translates into more running time of the motor where it spends a lot of time working instead of stalled doing no work.
Features of the Solar Converters PPT 12-24-30 Linear Current Booster - Pump Driver - 30 Amp:
- 12 / 24 V @ 30 amp Linear Current Booster/Pump Driver
- Voltage Limited Output to 15 / 30 V
- Greatly increases water flow, even under reduced sunlight conditions (over 40% likely)
- Transient Protected on the input and output
- Float Switch input for on/off control
- Pump Protection Features - Well Dry, Low Sun, Current Limited, Temperature Limited
- LED Display of pump performance
- Interface for Optional Digital meter MT-3
- Ultra High Efficiency >94 %
- Rainproof NEMA 3R enclosure
Also Known As:
PPT.12-24-30
PPT-12-24-30
PPT_12-24-30
PPT12-24-30
Also Known As:
PPT.12-24-30
PPT-12-24-30
PPT_12-24-30
PPT12-24-30
| Electrical Specifications | |
| Nominal Voltage (V) | 12 / 24 |
| Nominal PV Input (V) | 12 / 24 |
| Maximum PV Input (V) | 50 |
| Maximum Output Voltage (V) | 15 / 30 |
| Maximum Output (A) | 40 |
| Maximum Output (A) short term - 10 sec | 60 |
| Efficiency | >94% |
| MechanicalSpecifications | |
| Weight | less than 1 lb. |
| Sizes | 4.5" X 2.1" X 2.1" resembling a junction box with mounting feet |
| Operating Temperature | -40 to 70 deg. C |
| Humidity | 90 % non-condensing |
