OutBack Power VFX3524M Vented M-Series Sine Wave Inverter 3500W
OutBack Power VFX3524M Vented M-Series Sine Wave Inverter 3500W
The OutBack M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sinewave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching.
All M-Series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs. Industry leading surge power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to recharge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord.
OutBack's modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE2M controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in the field are easy thanks to a simple three circuit board design. The OutBack M-Series inverter is the superior choice when you need a reliable, powerful and modular true sinewave inverter/charger.
The sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.
The vented OutBack M-Series has the same proven technology and conformal coated circuit boards as the sealed version but offered in a vented chassis for higher power output. The fully screened "bug-proof" openings keep the power conversion components cool in very hot environments even when operated at high power for extended periods in more protected environments.
Features of the OutBack Power VFX3524M Vented M-Series Sine Wave Inverter 3500W:
M-Series Specifications | Sealed Models | Vented Models | ||||
FX2012MT | FX2524MT | FX2532MT | VFX2812M | VFX3524M | VFX3232M | |
Nominal DC Input Voltage | 12 VDC | 24 VDC | 48 VDC | 12 VDC | 24 VDC | 32 VDC |
Continuous Power Rating at 25 degrees C | 2000 VA | 2500 VA | 2500 VA | 2800 VA | 3500 VA | 3200 VA |
AC Voltage/Frequency | 120Vac 60 Hz | 120Vac 60 Hz | 120Vac 60 Hz | 120Vac 60 Hz | 120Vac 60 Hz | 120Vac 60 Hz |
Continuous AC RMS Output current at 25 C | 17.0 amps AC | 20.8 amps AC | 20.8 amps AC | 23.3 amps AC | 29.2 amps AC | 26.6 amps AC |
Idle Power | Full ≈ 20 Watts Search 2.6 Watts | Full ≈ 20 Watts Search 2.6 Watts | Full ≈ 21 Watts Search 2.6 Watts | Full ≈ 20 Watts Search 2.6 Watts | Full ≈ 20 Watts Search 2.6 Watts | Full ≈ 21 Watts Search 2.6 Watts |
Typical Efficiency | 90% | 92% | 92% | 90% | 92% | 92% |
Total Harmonic distortion voltage (typical / max) | 2% / 5% | 2% / 5% | 2% / 5% | 2% / 5% | 2% / 5% | 2% / 5% |
Output Voltage Regulation | +/- 2% typ. | +/- 2% typ. | +/- 2% typ. | +/- 2% typ. | +/- 2% typ. | +/- 2% typ. |
Maximum Output Current (Peak/RMS) | 56 amps AC/40 amps AC | 70 amps AC/50 amps AC | 56 amps AC/40 amps AC | 56 amps AC/40 amps AC | 70 amps AC/50 amps AC | 56 amps AC/40 amps AC |
Overload Capability - Surge | 4800VA | 6000VA | 4800VA | 4800VA | 6000VA | 4800VA |
Overload Capability - 5 Second | 4000VA | 4800VA | 4000VA | 4000VA | 5000VA | 4000VA |
Overload Capability - 30 Minutes | 2500VA | 3200VA | 2500VA | 3200VA | 4000VA | 4000VA |
AC Input Current Maximium | 30 amps AC | 30 amps AC | 30 amps AC | 30 amps AC | 30 amps AC | 30 amps AC |
AC Input Voltage Range (MATE Adjustable) | 80 to 150 VAC | 80 to 150 VAC | 80 to 150 VAC | 80 to 150 VAC | 80 to 150 VAC | 80 to 150 VAC |
AC Input Frequency Range | 54.0 to 66.0 Hz | 54.0 to 66.0 Hz | 54.0 to 66.0 Hz | 54.0 to 66.0 Hz | 54.0 to 66.0 Hz | 54.0 to 66.0 Hz |
DC Input Range | 10.5 to 17.0 VDC | 21.0 to 34.0 VDC | 28.0 to 45.3 VDC | 10.5 to 17.0 VDC | 21.0 to 34.0 VDC | 28.0 to 45.3 VDC |
Continuous Battery Charger Output | 80 amps DC | 55 amps DC | 35 amps DC | 125 amps DC | 85 amps DC | 45 amps DC |
Minimum Recommended DC Breaker | OBDC-250 | OBDC-175 | OBDC-125 | OBDC-250 | OBDC-250 | OBDC-175 |
Recommended Battery Cable | #4/0 AWG | #2/0 AWG | #2/0 AWG | #4/0 AWG | #4/0 AWG | #2/0 AWG |
Recommended Battery Types | Flooded lead acid, AGM, gel | Flooded lead acid, AGM, gel | ||||
Warranty | Standard 2 year / Optional 5 year | Standard 2 year / Optional 5 year | ||||
Certifications | ETL listed to UL458 | ETL listed to UL458 | ||||
Unit Weight | 56 lbs (25 kg) | 54 lbs (25 kg) | ||||
Shipping Weight | 67 lbs (30 kg) | 62.2 lbs (30 kg) | ||||
Unit Dimensions (H x W x L) | 13 x 8.25 x 16.25" (33 x 21 x 41 cm) | 12 x 8.25 x 16.25" (30 x 21 x 41 cm) | ||||
Shipping Dimensions (H x W x L) | 21.75 x 13 x 22" (55 x 33 x 56 cm) | 21.75 x 13 x 22" (55 x 33 x 56 cm) |