OutBack Power GTFX2524
OutBack Power GTFX2524 Sine Wave Inverter 2500W

GTFX2524 Sine Wave Inverter 2500W, 24VDC, 120VAC, 60Hz sealed w/turbo

OutBack
GTFX 2524 Inverter-Charger

A New Standard of Performance
• True Sinewave Output
• Low THD
• Over Three Times Surge Capacity
• 60 Amp AC Transfer Switch
• Low Idle Power Consumption
• Super Efficient
• Five Stage Smart Charger
• Series Stackable
• Parallel Stackable
• Three Phase Stackable

The OutBack FX series is a modular "building block” sine wave inverter/charger that can be used for both small and large power systems. Each OutBack FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future.

The OutBack FX series is also available in export versions with 230 VAC, 50 Hz output that can be connected in parallel (230 VAC) or in three phase (230Y400 VAC) configurations. The OutBack FX is designed to survive harsh environments anywhere in the world. Our unique sealed, gasketed die-cast aluminum chassis protects and keeps the power conversion components cool - without requiring outside air to be blown through the sensitive electronics. This reduces the major causes of inverter failure - corrosion, dust, insect and animal damage. The FX can be used in high ambient applications up to 60oC with reduced output ratings.

The OutBack FX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PS2DC, PSDC, PS2AC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display.

Sealed Construction Features:
• Powdercoated all aluminum die-cast chassis
• Internal electronic components are cooled by heat transfer
• Gaskets on all openings to provide water-resistance
• Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold etc.
• Conformal coated circuit boards to resist corrosion
• Designed to allow easy field servicing and repair

Ideal Applications:
• Hot and humid climates where a protected area is not available for installation of the inverter/charger system
• Salt air environments such as Hawaii where you can’t get away from the salt air and where there is little difference between indoors and outdoors
• Dirty environments where dust or drifting organic matter such as cottonwood could clog an air opening in an unattended system
• Boats and RV’s where water might splash on the inverter
• Greater control of unwanted radio frequency interference

OutBack Power Grid Interactive Inverter Versions - 120VAC 60Hz

		Sealed Models			Vented Models
		GTFX2524	GTFX3048		GVFX3524	GVFX3648
Nominal DC Input Voltage		24VDC	48VDC		24VDC	48VDC
Continuous Power Rating 25° C		2500VA	3000VA		3500VA	3600VA
Nominal AC Input Voltage/Frequency		120VAC / 60Hz	120VAC / 60Hz		120VAC / 60Hz	120VAC / 60Hz
Continuous AC RMS Output @ 25° C		20.8 amps AC	25.0 amps AC		29.2 amps AC	30.0 amps AC
Idle Power	Full	~ 20 Watts	~ 20 Watts		~ 20 Watts	~ 20 Watts
	Search	~ 6 Watts	~ 6 Watts		~ 6 Watts	~ 6 Watts
Typical Efficiency		92%	93%		92%	93%
Total Harmonic Distortion	Typical	2%	2%		2%	2%
	Maximum	5%	5%		5%	5%
Output Voltage Regulation		+/- 2%	+/- 2%		+/- 2%	+/- 2%
Surge Power Peak (1mSec)		70 amps AC	70 amps AC		70 amps AC	70 amps AC
Surge Power RMS (100mSec)		50 amps AC	50 amps AC		50 amps AC	50 amps AC
Overload (from 25° C start)	Surge	6000VA	6000VA		6000VA	6000VA
	5 sec	4800VA	4800VA		5000VA	5000VA
	30 min	3200VA	3200VA		4000VA	4000VA
AC Input Current Maximum		60 amps AC	60 amps AC		60 amps AC	60 amps AC
AC Input Voltage Range (MATE Adjustable)		80 to 150 VAC	80 to 150 VAC		80 to 150 VAC	80 to 150 VAC
AC Input Frequency Range		58 to 62 Hz	58 to 62 Hz		58 to 62 Hz	58 to 62 Hz
DC Input Range		21.0 to 34.0 VDC	42.0 to 68.0 VDC		21.0 to 34.0 VDC	42.0 to 68.0 VDC
Continuous Battery Charger Output		55 amps DC	35 amps DC		85 amps DC	45 amps DC
Recommended DC Breaker		OBDC-175	OBDC-100		OBDC-250	OBDC-175
Warranty		Standard 2 year / Optional 5 year			Standard 2 year / Optional 5 year
Weight	Unit	56 lbs (25 kg)			54 lbs (25 kg)
	Shipping	67 lbs (30 kg)			62.2 lbs (28 kg)
Dimensions	Unit	13 x 8.25 x 16.25" (33 x 21 x 41 cm)			12 x 8.25 x 16.25" (30 x 21 x 41 cm)
	Shipping	21.75 x 13 x 22" (55 x 33 x 56 cm)			21.75 x 13 x 22" (55 x 33 x 56 cm)

Important Note for the OutBack Power GTFX2524 Sine Wave Inverter 2500W

Shipping Note: Due to the oversized nature of this product, our online shipping system is not able to accurately determine the cost for shipping. You may proceed with an online order and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.