FP1 FX3048T 3kW Pre-Wired Single Inverter System
OutBack FP1 FX3048T 3kW Flexpower One Fully Pre-Wired Single Inverter System
The new FLEXpower ONE System accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, chalets, homes, remote communication sites and back-up power systems. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and factory tested FLEXpower ONE System is designed for a quick installation, saving both time and money. FLEXpower ONE includes a single inverter, AC and DC wiring boxes, a single FLEXmax 80 MPPT Charge Controller, MATE3, HUB10, FLEXnet DC and Surge Protector while maintaining a small system footprint. The FLEXpower ONE System is also equipped with battery and PV array breakers, a PV GFDI breaker, an Input-Output-Bypass Assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers. FLEXpower ONE components carry all of the necessary ETL Certifications allowing for a code compliant installation that saves both time and money while still looking great.
The FLEXpower ONE is intended for on-grid, off-grid, and grid-interactive applications. It is designed to use photovoltaic (PV) panels to harvest solar energy and a battery bank to store the harvested energy.
In on-grid applications, the FLEXpower ONE can use the grid power as the primary power source or as the backup source of power. If the FLEXpower ONE is used as backup to the grid, the FLEXpower ONE will take over when the grid fails. If the FLEXpower ONE is used as the primary source, the grid power will be used when the batteries have been drained. In this situation, the AC power or PV harvest can be used to recharge the battery bank.
In off-grid applications, the FLEXpower ONE can use the harvested energy from the battery bank as the primary power source. An AC generator can also be connected to support the system when required.
Features of the OutBack FP1 FX3048T 3kW Flexpower One Fully Pre-Wired Single Inverter System:
- Fully Pre-Wired System
- Pre-wired Systems Includes: FX3048T 3kW FLEXpower ONE, Pre-wired AC and DC boxes with 120Vac Bypass, NEMA 5-15R Outlet, 175A DC breaker, GFDI, 80 Amp charge controller breaker, MATE3, HUB10, RTS, FLEXmax 80, FLEXnet DC and surge protector
- Fast Installation
- Rated for Indoor Installations
- Includes mounting bracket for wall-mounting
- Field Configurable Settings
- Optimized System Footprint
- Battery status monitor takes independent shunt measurements of PV and inverter power
- Includes OutBack's Surge Protector for additional protection against damaging power surges
- Factory Tested
Also Known As: