Morningstar SS10-12
Morningstar SS10-12 SunSaver 10 Charge Controller

SS10-12 SunSaver 10 Charge Controller , 12V, 10 Amp

Morningstar
SS10-12 SunSaver 10 Charge Controller

Morningstar’s SunSaver is the world’s leading small solar controller for both professional and consumer applications.

SunSaver’s technology provides:
• Exceptional Reliability
• PWM Battery Charging
• Consistent High Quality

The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:
• Automated production
• ISO 9002 quality programs
• Latest power electronic technologies
• Latest control and logic technologies
• High volume manufacturing

Features:
• Eight versions available (see below) 12 and 24 volts 6, 10 and 20 amps
• 100% solid state
• Series design (not shunt)
• True 0 to 100% PWM duty cycle
• Setpoint accuracy to 35 mV
• Rated for 25% overloads
• Fully encapsulated in epoxy potting
• Marine rated terminals/anodized case
• Temperature compensation
• Sealed/Flooded battery select
• No need to derate
• Parallel for 40 amps or more
• Green charging/Red LVD indicators
• Approved for use in hazardous locations – Class 1, Division 2, Groups A, B, C, D.

Mechanical Specifications
Wire size #10 AWG (5.2 mm2)
Anodized aluminum case
Marine rated terminals
Epoxy encapsulated
Weight is 8 oz (0.23 kg)

Electrical Specifications

	12 Volt	24 Volt
Rated Solar Input	6.5 /10 /20 A	6.5 /10 /20 A
Rated Load	6 /10/20 A	6 /10/20 A
25% Current Overload	5 min.	5 min.
Regulation Voltage: Sealed Battery	14.1 V	28.2 V
Flooded Battery	14.4 V	28.8 V
Load Disconnect	11.5 V	23.0 V
LVD Reconnect	12.6 V	25.2 V
Temp. Comp. (mV/°C)	-28	-56
Self-consumption	6 to 10 mA	6 to 10 mA
Operating Temp.	-40 to +85°C	-40 to +85°C

Also Known As:

SS10.12
SS10 12
SS10_12
SS1012