Nottagutter-2 Circuit Breaker Panel Box with Dual 60A Bypass and two 60A Single Breakers
Midnite Solar Nottagutter-2 Circuit Breaker Panel Box
- Small size compared to existing disconnect and over current solutions
- Pre-wired to save time, money and complexity. All field wiring connections clearly labeled
- White powder coated aluminum or standard gray powder coated steel
- Easily expands to accommodate additional inverters
- Positive DC battery/inverter busbar with five 5/16” diameter studs locatable on either side of enclosure
- Negative DC inverter busbar with four 5/16” diameter studs mounted on one half of 500 amp shunt
- Negative DC battery connection on side of 500 amp shunt. Shunt may be located on either side
- 15 position terminal busbars for leg 1 & 2 AC IN, leg 1 & 2 AC OUT, Neutral and Ground.
- Mounting embosses for AC leg 3 in and out or other insulated circuits (MNSBB)
- 60 amp 277VAC 2 pole bypass breaker standard
- 60 amp inverter AC output breakers (specify 2,4,6 or 8)
- Center din rail mounts up to twelve single pole or six 2 pole breakers in any combination
- Bypass slider configurable for up to four single pole or two 2 pole breakers on one side and 8 single pole breakers on the other side. The eight breakers may be AC output and AC input together. The eight breakers may also be four 2 pole breakers.
- Four Ultralite E-Panels can mount to each Nottagutter for OutBack, Magnum and Apollo inverters.
- Up to two Sunny Island inverters accommodated easily
- 175 or 250 amp inverter breakers may be installed in each end of the enclosure
- Right and Left hand charge control brackets may be installed in each end of the enclosure Six position din rail included that can mount in one of the DC positive busbar locations
- Knockouts for single charge controller on the side in the middle of enclosure
- Six position din rail included that can mount in one of the DC positive busbar locations
- Knockouts on top and bottom surfaces to match up with Ultralite E-Panels and battery conduit connections
- Install up to four UltraLite E-Panels with each Nottagutter. The Nottagutter accepts two E-Panels on top and two E-Panels bottom or on the sides as shown to the right. Dual 60 amp bypass and two 60 amp single breakers.
- Box Size: 40” x 16” x 6”
- Weight: 20lbs
Also Known As: