Midnite Solar MNPV4-MC4 Prewired PV Combiner Box with MC4 Connectors
[MNPV4-MC4, MNPV4.MC4, MNPV4 MC4, MNPV4_MC4, MNPV4MC4]
Midnite Solar MNPV4-MC4 Prewired PV Combiner Box with MC4 Connectors
MNPV4-MC4 Prewired DC Combiner, 4 position, 600 VDC, Nema 3R, 80A max
The Pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using 10mm x 38mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders and fuses allow operation up to 600 Volts. The MNPV4 is rated for up to 80 amps.
Features of the Midnite Solar MNPV4-MC4 Prewired PV Combiner Box with MC4 Connectors:
- 4 fuse holders, 15 Amo fuses and bulkhead mount connectors alreay installed and wired
- Fast, Convenient hook up with industry standard connectors
- All aluminum powder coated housing that won’t rust
- Flip up cover that can stay in the open position during installation
- PV Negative bus bar with #6 and 1/0 connections
- Chassis ground bus bar with #6 and 1/0 connections
- Standard DIN rail with (x) 30 amp touch safe fuseholders. 15 amp fuses included
- Tin plated copper bus bar that connect PV Plus outputs
- Dead front cover snaps into place after wiring is complete for safety
- Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides
- Top surface is available to bring conduit in from directly above the enclosure
- ETL listed to UL1741 for use in the US and Canada
Also Known As:
MNPV4.MC4
MNPV4 MC4
MNPV4_MC4
MNPV4MC4
Note: Specifications and pricing of the Midnite Solar MNPV4-MC4 Prewired PV Combiner Box with MC4 Connectors subject to change without notice. Illustrations and descriptions of the Midnite Solar MNPV4-MC4 do not claim to be complete or exhaustive.
