Midnite Solar MNE250STM-L
Midnite Solar MNE250STM-L Gray Steel Magnum E-Panel with 250A/125VDC Inverter Breaker

MNE250STM-L Gray Steel Magnum E-Panel with 250A/125VDC Inverter Breaker

Midnite Solar MNE250STM-L Gray Steel Magnum E-Panel with 250A/125VDC Inverter Breaker

The Midnite 120 VAC Magnum E-Panel was designed to provide the additional components necessary to create a code compliant system. This combination is now the standard off-grid system offered by North American professional Solar installers. Midnite E-Panels are a compact, affordable and professional panel for mounting a single inverter.

Over-current disconnects are an essential part of every RE system. Renewable energy circuit breakers are not normally stocked at your average electrical supply company. These breakers are custom manufactured to insure that these systems have the proper protection for the many different AC & DC circuits involved. The Midnite E-Panel integrates a PV input, circuit charge controller outputs, circuit inverter over current protection, DC load circuits, AC input disconnect, AC input/output bypass, AC load circuits, DC-GRP circuit, wind turbine input circuit and hydro input circuits. Traditional electrical supply companies do not stock this type of product.

COMPACT: Smaller size takes up less wall space

MORE SLOTS: Six din rail breaker slots for PV, Wind, Hydro, and AC distribution. Unique side plate design provides breaker flexibility

HARDWARE: Hardware included for inverter, charge controller, wall mounting brackets, remotes gfci's, DC-GFP's etc.

AGENCY APPROVALS: ETL listed to US and Canadian standards and NEC compliance eases Electrical inspector concerns

INVERTER: Inverter battery breaker and inverter cables included

PREWIRED: AC input output and bypass assembly pre-wired. Battery Plus bus pre-wired. AC, DC, and PV bus bars installed

Features of the Midnite Solar MNE250STM-L Gray Steel Magnum E-Panel with 250A/125VDC Inverter Breaker

• Small size compared to existing disconnect and over current solutions
• Pre-wired to save time, money and complexity. All field wiring connections clearly labeled
• White powder coated aluminum or standard gray powder coated steel
• Three slots for ¾" wide panel mount breakers like the MNEDC80
• Easily expands to accommodate additional inverters
• Six slots for ½" wide din rail mount breakers like the MNEPV63
• Pre-wired 50 amp 277VAC rated Inverter AC bypass switch
• Pre-wired 50 amp 277VAC rated AC Input disconnect
• Bus bars for Battery Plus, Battery Minus, ground, PV+, PV-, AC hot in, AC hot out, Neutral
• Mounting hardware for Inverter and charge controller
• Mounting brackets for hanging E-Panel on wall
• ETL listed to UL and Canadian standards
• Standard Left hand hinged door to mount inverter - Right hand optional
• Knockouts for AC and DC conduits
• Charge control brackets (CCB) & 1" close nipple
• Cut outs for one GFCI outlet
• DC Inverter Battery breaker 125A, 175A, or 250A
• Internal inverter cables

Also Known As:
MNE250STM.L
MNE250STM L
MNE250STM_L
MNE250STML