Midnite Solar MNE175STM-L
Midnite Solar MNE175STM-L Gray Steel Magnum E-Panel with 175A/125VDC Inverter Breaker

MNE175STM-L Gray Steel Magnum E-Panel with 175A/125VDC Inverter Breaker

Midnite Solar MNE175STM-L Gray Steel Magnum E-Panel with 175A/125VDC Inverter Breaker

The MidNite Solar E-Panel system is a serious time saver due to its easy to install wiring, simple inverter mounting procedure and complete all-in-one components. The E-PANEL is designed for one OutBack FX series inverter/charger, up to two charge controllers. Other Outback Products can also be used to provide familiar functionality to your back-up power, grid-tie or off-grid system. The E-Panel comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise.

Features of the Midnite Solar MNE175STM-L Gray Steel Magnum E-Panel with 175A/125VDC Inverter Breaker

• Export versions of our standard E-Panels are made using Blue and Brown wire and terminal bus bar insulators.
• Steel or aluminum chassis with all the required openings and knock outs to aid in a NEC compliant system installation.
• Inverter mounts on a unique hinged door to keep the foot print of the system small as possible
• Mounting brackets are included to aid in one person installations
• Inverter battery breaker, inverters cables and snap in grommets included*
• 500 amp / 50mv shunt included for battery monitoring systems
• Bus bars are included for additional battery plus, PV plus and battery minus wiring **
• Heavy duty 175 amp AC power distribution bus bars included
• 50 amp AC input disconnect for generator or utility included, pre-wired (15amp MM series)
• 50 amp AC bypass switch for bypassing inverter circuit, pre-wired (15amp MM series)
• Mounting bracket to aid in mounting an OutBack MX60 or MidNite Classic to the side of the E-Panel*
• Battery cable cover to enclose cables external to the chassis***
• Inverter and charge controller mounting hardware
• Rectangular cut outs for mounting a North American GFCI style AC outlet
• Cut outs for mounting up to six additional 13mm wide din rail mount breakers for additional circuits such as PV, wind, hydro or AC distribution
• Plastic snap in conduit and fittings from chassis to inverter for AC, BTS and control circuits (OB versions)
• ETL listed to UL and CSA standards
• Weight: 28 lbs
• Box Size: 14 x 12 x 28"

* Inverter cables and charge control bracket omitted on the LT configurations
** The OB versions use a flat copper plate for bat + bus and do not have a PV + in bus.
*** LT versions do not have a cable cover, MM series uses the inverter battery terminal caps

Also Known As:
MNE175STM.L
MNE175STM L
MNE175STM_L
MNE175STML

Specifications for the Midnite Solar MNE175STM-L Gray Steel Magnum E-Panel with 175A/125VDC Inverter Breaker