Magnum Energy MS4348PE 4300 Watt MS-PE Series Pure Sine Wave Inverter/Charger
MS4348PE 4300 Watt MS-PE Series Pure Sine Wave Inverter/Charger
The MS-PE 230V Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PE Series is powerful, easy-to-use, and best of all, cost effective.
Parallel stacking: You can parallel up to four inverter/chargers for up to 17.2kw of power at 230V. The Magnum Router is required for parallel stacking the MS-PE Series.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-PE Series is listed to the stringent requirements CE for renewable energy installations.
Features of the Magnum Energy MS4348PE 4300 Watt MS-PE Series Pure Sine Wave Inverter/Charger:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low totalharmonic distortion (THD) of less than 5%.
Versatile mounting: Mount the MS-PE Series on a shelf or wall .
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS-PE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connectionterminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MS-PE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Buy with ease: The MS-E Series is backed by a two-year (24-month) limited warranty.>
|Input battery voltage range||18 - 34 VDC||36 - 64 VDC|
|Nominal AC output voltage||230 VAC ±5%||230 VAC ±5%|
|Output frequency and accuracy||50 Hz ± 0.4 Hz||50 Hz ± 0.4 Hz|
|Total Harmonic Distortion (THD)||< 5%||< 5%|
|1 msec surge current (amps AC)||65||75|
|100 msec surge current (amps AC)||30||37|
|5 sec surge power (real watts)||6300||7500|
|30 sec surge power (real watts)||5300||7100|
|5 min surge power (real watts)||4750||6600|
|30 min surge power (real watts)||4600||5000|
|Continuous power output at 25° C||4100 VA||4300 VA|
|Maximum continuous input current||273 ADC||143 ADC|
|Inverter efficiency (peak)||90%||91%|
|Transfer time||20 ms||20 ms|
|Search mode (typical)||9 watts||9 watts|
|No load (230 VAC output, typical)||30 watts||28 watts|
|Waveform||Pure Sine Wave||Pure Sine Wave|
|Continuous output at 25° C||105 ADC||55 ADC|
|Charger efficiency (peak)||88%||91%|
|Power factor||> .95||> .95|
|Input current at rated output (AC amps)||14||16|
|General Features and Capabilities|
|Transfer relay capability||30 amps AC|
|Five stage charging capability||Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™|
|Battery temperature compensation||Yes, 4.6 m Battery Temp Sensor standard|
|Internal cooling||0 to 120 cfm variable speed drive using dual 92mm brushless DC fans|
|Overcurrent protection||Yes, with two overlapping circuits|
|Overtemperature protection||Yes on transformer, MOSFETS, and battery|
|Conformal coating on PCB's for corrosion protection||Yes|
|Powder coated chassis & top for corrosion protection||Yes|
|Stainless steel fasteners for corrosion protection||Yes|
|Operating temperature||-20° C to +60° C (-4° F to 140° F)|
|Nonoperating temperature||-40° C to +70° C (-40° F to 158° F)|
|Operating humidity||0 to 95% RH non condensing|
|Dimensions (l x w x h)||13.75" x 12.65" x 8.0"|
(34.9 cm x 32.1 cm x 20.3 cm)
|15.0" x 6.5" x 5.0"|
(38.1 cm x 16.5 cm x 12.7 cm)
|Mounting||Shelf (top or bottom up) or wall|
|Weight||55 lb (25.0 kg)|
|Shipping weight||56 lb (28.6 kg)|
|Max operating altitude||15,000' (4570 m)|