MM612AE 600 Watt 12V Modified Sine Wave Inverter
Magnum Energy MM612AE 600 Watt 12V Modified Sine Wave Inverter
Cost Effective Inverter/Chargers from Magnum Energy
The MM-AE Series Inverter/Charger from Magnum Energy is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in renewable energy applications. Versatile, easy to use, and lightweight, the MM-AE Series provides a reliable base for your energy system.
Power Factor Corrected (PFC) Charger:Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Features of the Magnum Energy MM612AE 600 Watt 12V Modified Sine Wave Inverter:
Versatile mounting: Mount the MM-AE Series on a shelf, wall, or even upside down.
Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.
Fan cooled: The MM-AE Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low battery protection: If your battery voltage goes below the cut-out setting, the MM-AE Series will automatically shut down, saving your batteries.
High battery protection: If your battery voltage reaches over the cut-out setting, the MM-AE Series will shut down.
Current overload protection: The MM-AE Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
Convenient switches: The MM-AE Series comes with an on/off front-mounted switch and an easy-to-read LED indicator.
Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.
Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.
Buy with ease: The MM-AE Series is backed by a two-year (24-month) parts and labor warranty.
|MM-AE Series Inverter/Charger Specifications||MM612AE||MM1512AE||MM1524AE|
|Input battery voltage||9 to 16 VDC||9 to 16 VDC||18 to 32 VDC|
|InputNominal AC output voltage||120 VAC ± 5%||120 VAC ± 5%||120 VAC ± 5%|
|InputOutput frequency and accuracy||60 Hz ± 0.1%||60 Hz ± 0.1%||60 Hz ± 0.1%|
|Input1 msec surge current (amps AC)||27||42||45|
|Input100 msec surge current (amps AC)||11||23||24|
|Input5 sec surge power (real watts)||1100||2100||2650|
|Input10 sec surge power (real watts)||1050||1900||2575|
|Input30 sec surge power (real watts)||1000||1750||2500|
|5 min surge power (real watts)||950||1550||2350|
|30 min surge power (real watts)||675||1525||1900|
|Continuous power output at 25° C (with 1.0 PF)||600 VA||1500 VA||1500 VA|
|Continuous current output||5 AAC||10 AAC||13 AAC|
|Maximum input battery current||80 ADC||200 ADC||100 ADC|
|Inverter efficiency (peak)||95%||95%||95%|
|Transfer time||16 msecs||16 msecs||16 msecs|
|Search mode (typical)||3 watts||6 watts||4 watts|
|No load (120 VAC output, typical)||10 watts||18 watts||9 watts|
|Waveform||Modified Sine Wave||Modified Sine Wave||Modified Sine Wave|
|Continuous output at 25° C||30 ADC||70 ADC||35 ADC|
|Power factor||> 0.95||> 0.95||> 0.95|
|Input current at rated output (AC amps)||4||9||9|
General Features and Capabilities
|Transfer relay capability||20 AAC (input current for charging and pass through)|
|Battery temperature compensation||Yes, 15 ft Battery Temp Sensor standard|
|Remote available (optional)||Yes, MM-RC or ME-RC|
|Internal cooling||0 to 59 cfm variable speed|
|Overcurrent protection||Yes, with two overlapping circuits|
|Overtemperature protection||Yes on transformer and MOSFETS|
|On/Off with status indicator||Yes, front mounted and easily accessible|
|Low battery cutout||10 or 20 VDC, adjustable on most models with the ME-RC remote|
|AC output and input||Hardwire|
|Output circuit breaker||7 A switchable||12 A switchable||12 A switchable|
|Input circuit breaker||8 AAC||20 AAC||20 AAC|
|Operating temperature||-20° C to +60° C (-4° F to 140° F)|
|Nonoperating temperature||-40° C to +70° C (-40° F to 158° F)|
|Operating humidity||0 to 95% RH non condensing|
|Dimensions (l x w x h)||16.6" x 8.4" x 4.7" (42 cm x 21 cm x 12 cm)|
|Mounting||Shelf (top or bottom up) or wall (vents up)|
|Weight||16 lb (7.3 kg)||22 lb (10 kg)||22 lb (10 kg)|
|Shipping weight||18 lb (8.2 kg)||24 lb (10.9 kg)||24 lb (10.9 kg)|
|Max operating altitude||15,000' (4570 m)|
|Construction||ABS plastic top and cast aluminum bottom|